robbo1973

Forum Replies Created

Viewing 15 posts - 616 through 630 (of 644 total)
1 2 3 … 41 42 43
  • Author
    Posts
  • November 2, 2006 at 7:05 pm in reply to: nardi fe866ez #193817
    robbo1973
    Participant

    Re: nardi fe866ez

    hi other numbers on the cooker are fe8621ez a198 13601100
    any help appreciated thanx.

    October 31, 2006 at 4:10 pm in reply to: samsung rs21 #193773
    robbo1973
    Participant

    Re: samsung rs21

    hi mate thanx for your help spoke to electrue who say never heard of part number. i am desperate for some of these any help appreciated. 😀

    October 31, 2006 at 3:48 pm in reply to: whirlpool cooker fault 03 #193074
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    hi yes it was directly after model in bold type but the cust has now scrapped machine 👿 . was deffo the right number dont know what went wrong i have worked on loads of these but only changed the stop button. better luck next time :rolls: .thanx for all help anyway.

    October 27, 2006 at 9:23 pm in reply to: whirlpool cooker fault 03 #193071
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    thanx for all your help lads will let you know what happens.

    October 27, 2006 at 6:45 pm in reply to: whirlpool cooker fault 03 #193068
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    just noticed the part no on the leaflet 481271598024 could it be the wrong board? looks the same as original i did notice on the original no links are cut.

    October 27, 2006 at 6:43 pm in reply to: whirlpool cooker fault 03 #193067
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    hi “3” is the number on the rating plate. f03 was constantly on in the display now with new board in it displays stop every 10 secs and will not let you do anything else and with old board on it diplays f03 👿 . 2 different readings. proper fri afternoon 10 min job!!!!. thanx for any help.

    October 27, 2006 at 3:34 pm in reply to: whirlpool cooker fault 03 #193062
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    hi been to this machine today akz151/ix 858515115040, f03 fault changed board config table supplied said cut links 2 and 3 as there was a “3” after the 85 number now the display flashes stop every 10 secs. put old board back on and fault f03 is displayed. any thoughts appreciated chris.

    October 23, 2006 at 7:02 pm in reply to: whirlpool cooker fault 03 #193061
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    thanx mate didnt want to order part and be stuck with a board only w/pool could sort :tup:

    October 23, 2006 at 2:20 pm in reply to: whirlpool cooker fault 03 #193057
    robbo1973
    Participant

    Re: whirlpool cooker fault 03

    hi john thanx for quick response the number is 858515115040. model akz151/is

    October 23, 2006 at 1:14 pm in reply to: samsung RS20ccms #193025
    robbo1973
    Participant

    Re: samsung RS20ccms

    normally defrost sensor always going faulty 😛

    October 19, 2006 at 2:52 pm in reply to: filters for american f/frzr #192463
    robbo1973
    Participant

    Re: filters for american f/frzr

    thanks for that dave a lot cheaper than samsung rrp £60+ :tup:

    October 12, 2006 at 4:23 pm in reply to: Samsung washing machine problem. #191957
    robbo1973
    Participant

    Re: Samsung washing machine problem.

    hi this will be one of two things i have come across this problem before it is either the board or the wiring where it runs along the top past the spring chafes and snaps check this carefully i have had quite a few snap here. 😛 hope this helps.

    October 5, 2006 at 6:44 pm in reply to: Servis M6140AL no power up #190838
    robbo1973
    Participant

    Re: Servis M6140AL no power up

    hi i have had this a couple of times on the newer servis mahines if this is one of the ones with a little pcb behind the facia with the buttons on. if this goes the machine is dead other than that the main pcb is at fault. you said you were del it back have you done a repair on it wiring?.

    October 4, 2006 at 8:09 pm in reply to: wma31 #190748
    robbo1973
    Participant

    Re: wma31

    hi as in my previous post not oob and module never been off so wires will b round right way.

    August 18, 2006 at 8:06 pm in reply to: Stoves 720EF built under double oven Grill wont come on. #185394
    robbo1973
    Participant

    Re: Stoves 720EF built under double oven Grill wont come on.

    hi i agree with wsts have had this a few times in the past microswitch on hinge take off side panel good luck 😀

  • Author
    Posts
Viewing 15 posts - 616 through 630 (of 644 total)
1 2 3 … 41 42 43