rocker

Forum Replies Created

Viewing 15 posts - 526 through 540 (of 1,132 total)
1 2 3 … 35 36 37 … 74 75 76
  • Author
    Posts
  • January 2, 2012 at 9:32 pm in reply to: changover a new double oven #366253
    rocker
    Participant

    Re: changover a new double oven

    Martin, In answer to your question there is no rating plate on this oven, but I beleive it rated around 5400 watts = 22.5 amps. on my calculations I also reckoned this would require a radial circuit, but as stated I advised the customer to check with there sparks to look into running a new circuit circuit, if required, I must admit I was surprised of the outcome.!!
    john

    December 31, 2011 at 11:24 am in reply to: changover a new double oven #366250
    rocker
    Participant

    Re: changover a new double oven

    I advised them to call in a sparks who they know, which they did and he as confirmed its ok to use this spur off the ring main, and a 2.5mm cable to feed the oven.
    john
    (Thanks for advice guys)

    December 29, 2011 at 9:37 pm in reply to: changover a new double oven #366248
    rocker
    Participant

    Re: changover a new double oven

    good advice thanks

    December 29, 2011 at 9:14 pm in reply to: changover a new double oven #366246
    rocker
    Participant

    Re: changover a new double oven

    Thanks for reply I thought that may be the case.

    December 24, 2011 at 11:04 am in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366087
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    Bob, thanks for reply I am a bit lost myself with this one. re- the diagram / the neg grey cable that feeds the clock, there is a spade connector about 4 inches from clock..(appears to fit to selector) but can see that on diagram
    john.

    December 23, 2011 at 6:43 pm in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366085
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    Bob, received diagram thanks, sorry to keep on, but on my one, the negitive that has a direct feed to the clock, has a
    spade connector fitted in line,that feeds someting else, which I presume must go to selector !! as there is no other place to connect to..but not shown on diagram !!
    john

    December 23, 2011 at 6:02 pm in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366083
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    Bob, Please sent diagram sure that will help me.
    many thanks for your help with this.
    John

    email..ableappliances@gmail.com

    December 23, 2011 at 5:52 pm in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366080
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    Bob, it is a muli function oven, not sure about the cooling fan, dont remember seeing one, but could be wrong!!

    eveything you say is correct, except the clock has only three buttons.

    John

    December 23, 2011 at 5:45 pm in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366078
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    yes that is correct, (dont worry ask any questions you want glad of your help).
    John

    December 23, 2011 at 5:38 pm in reply to: Elba PX906 S/N 10209 dual fuel range cooker #366076
    rocker
    Participant

    Re: Elba PX906 S/N 10209 dual fuel range cooker

    Bob, mine has a digital clock!!. on the diagram shows the rotisserie switch close to the clock, but on mine the rotisserie is far away and opposite side of clock !!
    john

    December 6, 2011 at 9:43 pm in reply to: Elba PX906 Snr 10209 Dual Fuel #364957
    rocker
    Participant

    Re: Elba PX906 Snr 10209 Dual Fuel

    Thanks Bob. John

    December 5, 2011 at 7:11 pm in reply to: Bosch excell 1400 #364802
    rocker
    Participant

    Re: Bosch excell 1400

    thanks Martin.

    December 1, 2011 at 8:39 am in reply to: JLWD1404 (washer dryer) #364596
    rocker
    Participant

    Re: JLWD1404 (washer dryer)

    Mike, will give this a try, thanks for advice. John

    November 30, 2011 at 9:48 pm in reply to: JLWD1404 (washer dryer) #364594
    rocker
    Participant

    Re: JLWD1404 (washer dryer)

    Martin,
    I have disconnected the dryer elememts and tested.
    john

    November 18, 2011 at 9:05 pm in reply to: Siemens Double Oven – Fan not Running but oven heating #363809
    rocker
    Participant

    Re: Siemens Double Oven – Fan not Running but oven heating

    you will need to take wires off fan..check supply on each cable I suspect one will have power either pos or a neg..then u will be able to tell which one isnt feeding the fan & will know if its the pcb or selector.
    Also I think you may find that the negitive feed links both the heater & fan (check 1st)
    john

  • Author
    Posts
Viewing 15 posts - 526 through 540 (of 1,132 total)
1 2 3 … 35 36 37 … 74 75 76