rocker

Forum Replies Created

Viewing 15 posts - 826 through 840 (of 1,132 total)
1 2 3 … 55 56 57 … 74 75 76
  • Author
    Posts
  • June 22, 2009 at 1:25 pm in reply to: Diplomat fan oven #289900
    rocker
    Participant

    Re: Diplomat fan oven

    Eastlmark, thanks for your advice, have told customer. John

    June 8, 2009 at 6:34 pm in reply to: Whirpool AWM9000 #288819
    rocker
    Participant

    Re: Whirpool AWM9000

    Cheers Chris. John

    May 22, 2009 at 5:58 pm in reply to: Creda Cooker 48341 #287640
    rocker
    Participant

    Re: Creda Cooker 48341

    Thanks goose.

    May 20, 2009 at 9:57 pm in reply to: Hotpoint TDC62P #287487
    rocker
    Participant

    Re: Hotpoint TDC62P

    helo75, haven’t called yet, will check cables as you say, thanks for help.
    John

    May 19, 2009 at 9:52 pm in reply to: Zanussi D/W #287253
    rocker
    Participant

    Re: Zanussi D/W

    thanks for your replys gents. John.

    May 19, 2009 at 7:10 pm in reply to: Zanussi D/W #287251
    rocker
    Participant

    Re: Zanussi D/W

    Chris, were can I buy this. John

    May 19, 2009 at 4:30 pm in reply to: Zanussi D/W #287248
    rocker
    Participant

    Re: Zanussi D/W

    hole is in the fold of edge i.e at 90deg angle cant use bolt ect.
    thanks anyway. (there is a metal sealent) don’t know make.

    May 14, 2009 at 10:46 pm in reply to: Brandt VF3000JU1 (D/W) #286654
    rocker
    Participant

    Re: Brandt VF3000JU1 (D/W)

    Thanks for reply Dave will change valve. John

    May 13, 2009 at 12:01 pm in reply to: Creada 48341 Cooker #286533
    rocker
    Participant

    Re: Creada 48341 Cooker

    although the regulators are different I have changed over cables number for number.

    May 13, 2009 at 7:39 am in reply to: Creada 48341 Cooker #286530
    rocker
    Participant

    Re: Creada 48341 Cooker

    Nothing has been altered ie wiring ect, have fitted a energy regulator 40ER101C1P correct part !! (as I say no difference) can anyone please help me with this. John

    May 1, 2009 at 8:47 pm in reply to: Diplomat ADP1613 #285428
    rocker
    Participant

    Re: Diplomat ADP1613

    Jonah
    Many thanks for your advice. John

    April 30, 2009 at 9:01 pm in reply to: Siemens WE61021GB/01 #285448
    rocker
    Participant

    Re: Siemens WE61021GB/01

    Paul.
    Thanks for your help. John

    April 30, 2009 at 4:08 pm in reply to: Bosch Tumble Dryer WTL6106GB/07 #285430
    rocker
    Participant

    Re: Bosch Tumble Dryer WTL6106GB/07

    You say it dosen’t fill water tank, but pump is running, have you cleared the black tube that runs from pump to water container, this is proberly blocked had same fault last week, clear and try again. the mirco switch is a flood protection device, ie if water cant pump out, machine cuts out.
    I hope this answers your question.
    John.

    April 26, 2009 at 11:05 am in reply to: AEG 72630 Pnc 91400209600 #284071
    rocker
    Participant

    Re: AEG 72630 Pnc 91400209600

    Mike, will take your good advice cheers John.

    April 24, 2009 at 6:20 pm in reply to: AEG 72630 Pnc 91400209600 #284069
    rocker
    Participant

    Re: AEG 72630 Pnc 91400209600

    Just remembered I have the 4 tag org zanussi interlock will this work on this machine ?? cheers John.

  • Author
    Posts
Viewing 15 posts - 826 through 840 (of 1,132 total)
1 2 3 … 55 56 57 … 74 75 76