[rocker]

Re: Hotpint E6005 Hob

No didnt see any visiable springs nothing became loose, just Changed over glass onto the sensors, could I have dislodged one without knowing.
Cheers John

[rocker]

Re: Indesit W161UK

Thanks to both of you for advice. John

[rocker]

Re: Hotpoint E6005 hob

Thanks hotpt, John

[rocker]

Re: Hotpoint E6005 hob

Thanks Jim, John

[rocker]

Re: Hotpoint E6005

Thanks Jim.
John

[rocker]

Re: Kenwood KDW24Fi D/W

Chris, will give it a go, and hope for the best, sounds a load of junk.
thanks for advice John

[rocker]

Re: Kenwood KDW24Fi D/W

Chris, is it the usual fill hose blockages fault, as you get in bosch d/w, or something else. as you say its common. cheers john.

[rocker]

Re: bosch wfp3300

you say it tripped was that the fuse board RCD, if so possible brushes arcing, did you cleaned the commutator when fitting new brushes!!! checked the armature down to earth!!
hope this helps John

[rocker]

Re: Bosch classic WTL6102GB/02

cheers superfix, sounds good to me, many thanks for your help, learn something new all the time on this site. John.

[rocker]

Re: Bosch classic WTL6102GB/02

Phidom, have corrected model Number cheers.
The side panels come off, access to motor ect, the motor shaft passes into housing connecting fan blade …no easy access!!!

[rocker]

Re: Hotpoint WD860 P

Chris & Jim, thanks for your help, Jim received the tec info.
cheers John

[rocker]

Re: Hotpoint WD860 P

looked up connect web site no motor brushes listed, picture of motor has no visual bush holders showing , does this mean new motor if brushes shot !!!
John

[rocker]

Re: Hotpoint WD860 P

helo.
Not yet, but will do now, thanks for advice. John

[rocker]

Re: AEG 1271 (Zanussi cabinet)

Madmac, No haven’t called to see machine yet, but will check this out.
Many thanks. John

[rocker]

Re: Firenzi Fidw 42 D/W

many thanks Chris for your help. john

[Author]

Posts