[rolf]

Re: Bosch HBB-AP32-7 Oven

Emailed Neff for the wiring diagram. Don’t laugh i’m still waiting. So I managed to find an image online from someone else who had the same problem and the wire went to the fan element on the same side as the other red and white wire.

[rolf]

Re: HBB-AP32-7 Oven

It’s a Neff not a Bosch. Sorry

[rolf]

Re: Rangemaster g5 induction. regulator

Thank you, my minds been put to rest.
8)

[rolf]

Re: HUE61KS HOTPOINT OVEN

Thank you so much Steve. Stops me looking like a pillock for the second time. 😀

[rolf]

Re: ADG7470/1 Flashes 8 times

Load sensing circuit more like no sense circuit. Looks like I’m going to have to buy my pump raffle ticket and keep my fingers crossed and hope its not the PCB.
I’ll keep you posted.
Roll up roll up !!
Many thanks Dave, really appreciate your help.

[rolf]

Re: ADG7470/1 Flashes 8 times

Thank you very much Dave, it suggests it could be the OWI or pump problem but it drains fine so leaves me with a OWI problem.
As far as I could see there isn’t one on the machine but the exploded diagram shows either a OWI or pressure switch in the same place but no part numbers. 😕
Would you know how this machine knows its empty of water.
Many thanks

[rolf]

Re: Hotpoint wdl520 error code

Yeah Prewash don’t know what made me type rinse, been one of those days really. Thank you for your help.

[rolf]

Re: Hotpoint wdl520 error code

It’s logical for it to be the fill valve because it fills briefly pumps out a bit and when it should fill from the other valve it just sits there.
Just wanted confirmation of the error code so thank you very much. But I’m not sure how you did it. :rtm:

[rolf]

Re: Samsung 3E

Yep that’s what I was thinking, but they decided to bin it as it was graded stock. Shame really cos it’s a great machine. Logged for next time. Thanks

[rolf]

Re: Whirlpool Akz161 Thermal limiter

Hello Dave did the 12nc number help at all.
Thanks

[rolf]

Re: Whirlpool Akz161 Thermal limiter

Yeah
858516115124.
Thanks.

[rolf]

Re: Samsung 3E

I’ve got her try it again after going over the connections. If I get called back I’ll have a closer look. I’m sure there’s no tacho on it as its a dc motor with only about two wires that’s what made me think PCB, but I did only have a cursory look. TA

[rolf]

Re: Samsung 3E

Thank you Bryan.

[rolf]

Re: Samsung 3E

Thinking it might be the inverter board. Has anybody had a similar fault. Thanks

[rolf]

Re: One for the oldies 37275

Nice bit of kit. I’ve not seen a Flatley before, but i’m a mere baby at 43. It makes the hotpoint dryer recall look over the top.

I think it would make a great retro BBQ. Love it :fire:

[Author]

Posts