[rolf]

Re: One for the oldies 37275

Blooming heck. All the oldies are out now it’s like moths round a light, better not mention a problem i’m having with a Hotpoint Empress. 😆 :waving:

[rolf]

Re: One for the oldies 37275

Thanks Dave.
Really appreciate the info I’ll let you know how i get on when I go back. I think you might be showing your age though. 8)

[rolf]

Re: DRCS 68 B Fan

Just an update for anyone in the future, the fans are now available on there own. Just change both if you’ve got a noisy one.
Thanks.

[rolf]

Re: DRCS 68 B Fan

Thanks Bazza thats what I thought. but whats made me question it is because on connect it lists 5045382192832 and 5045382216804.

[rolf]

Re: DRCS 68 B Fan

Thanks Kai.
When you say the fans are part of the motor, I presume there interchangeable ie i can change just the fans. Many thanks.

[rolf]

Re: Hoover WDYN656D

Thanks Kaibart , IR reading is fine over a thousand meg. It’s binned now anyway she didn’t want to wait for parts. Customers eh, but thanks again for your advice.

[rolf]

Re: Whirlpool AWZ514D

Think it must do Grendal, she said she it was E04. Unless shes after a new washer off the landlord.
According to the interweb it could be NTC or Door lock, depending on who you believe. Someone must know.

[rolf]

Re: hpt aqualtis AQM8F pump comes on then goes off

I had exactly the same problem. Broken wire on ntc caused mine, hidden behind the cable tie. Only found it after changing pcb.

[rolf]

Re: ADP460

Thanks Steve. I changed thermostat and over heat stat and all”s well.

[rolf]

Re: ADP460

Thanks for that Steve I never checked the temperature as it seemed to cycle off and on at lower temperatures and I’ve nearly always found stat problems all or nothing
I will pop a temp gauge in when I return.
Have you had a similar problem on one of these. Many thanks.

[rolf]

Re: Hotpoint WDL540P

Ok were back in action with this washer. I took both the pressure switch and thermistor with me but I only needed the thermistor so a big thumbs up to Johnnyj and hotdog. Thankyou so much guys, you got me out of dodge. 😀

[rolf]

Re: Hotpoint WDL540P

Thanks that’s two nods towards a thermistor so I’ll get them ordered and let you know how i get on. Really appreciate the advice. Thankyou both.

[rolf]

Re: Hotpoint WDL540P

Hope you enjoying your Holiday while I’m upto my eyes indeshit …..Carbons ok, had a look at the wires to thermistor that sometimes break all ok, tried it with thermistor unpluged.I did’nt pay anymore attention to the thermistor as it fills and washes just will not pump out apart from a one second burst.

[rolf]

Re: Bosch dishwasher drain out

Thanks Squadman, I did check the cover was in place so going to try and get back and have a look at this valve thingy. The older type you could access from inside the washer but this little contraption is in line with the drain hose by the looks of it.

[rolf]

Re: Bosch dishwasher drain out

Thanks Martin ooohhh errr yes Bosch one way valve 😳 . Had a look at the parts list and its a cylinder with a flap do they fail or is it always blockages. :tup:

[Author]

Posts