Forum Replies Created
-
Posts
-
Re: John Lewis Upright Freezer FZW1816
Don’t recognise the model it on a lot of these style lux have brought out an external drain tube mod, the internal drain tube freezes and blocks, a messy repair as you have to cut out the back panel (from rear) and install from there
Re: barcodes
I don’t currently have barcodes on the bin just the item location i.e A1 etc.
I need to create the barcode so I can scan it. ive been told I can do it by downloading a font to word, but buggered if I can get that to work.Re: beko leak
The bottom condenser hose is prone to leaking on these, mainly during drying cycle, check that 1st
Re: Route planning
just an update. speedyroute.com is really good and you can use upto 5 routes per 24 hrs after that you have to subscribe @£30 per month, for our other techs we use optimap.net which is good but for some reason doesn’t always load.
Re: Route planning
Cheers guys. Optimap worked great 1st time then couldn’t get it to work again, Google maps doesn’t optimise the route it just directs you around them
Re: north west based work
Sorry about the delay in replying, yes mike we are Wirral based and are always on the lookout for decent staff, if you know anyone let me know, it would be employed and not sub-contract
Rub
Re: north west based work
I love the ‘wet and dry are ten a penny’ quote. If so send some my way I’m crying out for decent reliable engineers. Had 3 start this year and let them all go as thinking you can do this job and actually doing this job are massively different. It amazes me how people apply with a good cv but when asked to do the basics they struggle. Wish everyone was as good as me! 😉 ha ha.
Re: servicenet
Hi guys thanks for the heads up, we decided to swerve at all costs. I had a few conversations with other service centres who all advised near on impossible to get payment.
Sometimes it pays to share.
Thanks
Rub
Re: True commercial freezer
Thanks. Im going back tomorrow i will check whilst im there. If it is that are they as easy to replace as a domestic as i never normally touch commercial just trying to keep my self in the good books! cheers
Re: Quote to supply and fit appiances Chester CH1
Hi Steve.
We are a wirral based company that also cover Chester and North wales.
We could supply and fit both appliance for you with removal opf old appliances.
Regards the gas safe certifcate for the cooker we issue a job sheet to say it has been installed safely but not an actual certificate.
If you would like me to get actual prices let me know
Paul
Re: Beko drcs68w
most likely the pcb however dont rule out the socket/plug, if you have a poor connection in the wall socket it can cause overheating in the plug. Does the plug get hot in use? it shouldnt. if not probably the pcb.
Rub
