scientist

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 60 total)
1 2 3 4
  • Author
    Posts
  • October 4, 2011 at 8:33 pm in reply to: SWD80p hotpoint dishwasher #360586
    scientist
    Participant

    Re: SWD80p hotpoint dishwasher

    Yep. it has three tag but has a block connector which would not allow you to connect up the wrong tags.

    October 4, 2011 at 6:35 pm in reply to: Candy GO482/1-80 washing machine #360567
    scientist
    Participant

    Re: Candy GO482/1-80 washing machine

    Gotcha… I did tighten them when I was there told customer to hold off on tryiny the unit until I checked this out.. Thanks for the swift reply..

    August 5, 2011 at 10:16 pm in reply to: Indesit IDL 535 tablet dispenser #356809
    scientist
    Participant

    Re: Indesit IDL 535 tablet dispenser

    Check to see if she is using one of those clip on freshners or the top basket is in the correct position. If the water is spraying up and the door is open the tablet should be able to drop out! Also depends on the way the customer is loading the unit. Big dinner plates can obstruct the tablet.

    August 5, 2011 at 10:11 pm in reply to: Maytag top loader MAV9750AGW #355123
    scientist
    Participant

    Re: Maytag top loader MAV9750AGW

    Pcb + 10amp fuse sorted this issue out. Pcb cheap as well!

    July 15, 2011 at 10:34 am in reply to: Indesit WD12X. #343818
    scientist
    Participant

    Re: Indesit WD12X.

    The unit I have been out to was in storage for five years and has never been used. As I live in Rep of Ireland I have never heard of EMW although I have heard there was a company in the UK that did this. Thanks for all the help.

    July 14, 2011 at 12:38 pm in reply to: WD12x Indesit washer/dryer #355259
    scientist
    Participant

    Re: WD12x Indesit washer/dryer

    Gotcha….EMW?? can you fill me in?

    July 14, 2011 at 12:29 pm in reply to: Indesit WD12X. #343814
    scientist
    Participant

    Re: Indesit WD12X.

    EMW?? Same issue on one of these..

    July 10, 2011 at 4:57 pm in reply to: AEG LAVAMAT TURBO 14850 Not Drying #355145
    scientist
    Participant

    Re: AEG LAVAMAT TURBO 14850 Not Drying

    If the clothes are hot but not dry it could be the dryer fan is faulty or jammed.

    July 8, 2011 at 8:53 am in reply to: Hoover washing machine 8yrs old #355031
    scientist
    Participant

    Re: Hoover washing machine 8yrs old

    The one thing I did notice was it rotates one direction, I hear the click as if it’s going too rotate again but nothing happens. So it does appear to be only rotating one direction. So is it.. A. Tacho
    B. Motor
    C. PCB
    D. Heater
    E. None of the above.
    Won’t get back to this unit til Monday as they’re away. So going back fully armed!! Thanks for the replys lads..

    July 7, 2011 at 9:48 pm in reply to: bosch washer fault #355053
    scientist
    Participant

    Re: bosch washer fault

    Would the answer be as simple as a “start” button sticking?. Have come across something similar with a different brand.

    July 7, 2011 at 9:37 pm in reply to: Hoover washing machine 8yrs old #355027
    scientist
    Participant

    Re: Hoover washing machine 8yrs old

    Yes the model would be handy… Apologies. Model is a CA230.

    July 7, 2011 at 8:48 am in reply to: John Lewis JLWM1201 Dryer fault code #355023
    scientist
    Participant

    Re: John Lewis JLWM1201 Dryer fault code

    E50,motor fault. Can you access diagnostics to reveal the code which should tell you pcb or motor. At a guess it would be the triac on the board blown.

    May 30, 2011 at 9:04 am in reply to: Whirlpool top loader #350435
    scientist
    Participant

    Re: Whirlpool top loader

    Very good, doesn’t look as if the seal on the gearbox is a spare part. Full job.

    Thanks for all the help.

    May 26, 2011 at 11:57 am in reply to: Hoover HC6150m #352162
    scientist
    Participant

    Re: Hoover HC6150m

    Cheers for that, am waiting for customer reply now. Not sure if this the issue so am giving it a go.. 😕

    May 26, 2011 at 8:08 am in reply to: Whirlpool top loader #350432
    scientist
    Participant

    Re: Whirlpool top loader

    Here I am again!!! I have three of these units with leaking gear boxes! Customers have donated them to me so I am thinking of fixing them and selling them on.So the questions are…. 1. Can the seal be replaced on the gear box ( has anyone tried this?)
    2. Price for a new gear box, Checked on sios and they are expensive. Does anyone stock them?
    3. Should I just walk away at this stage??? ( I’m not that kinda chap but will look forward to the replies 😆

    Cheers….

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 60 total)
1 2 3 4