[scientist]

Re: ADMIRAL LATA401AGE

Thanks Dave… Jobs OXO! 😀

[scientist]

Re: AZB 7570 whirlpool dryer

Has anyone got the list of error codes for this dryer? 😯

[scientist]

Re: Samsung washer dryer WD8704RJA

Woodwork class it is so!! Thanks for the speedy reply.

[scientist]

Re: Whirlpool dryer 3rler5437kq0

Would the motor have to be replaced with this issue or can arepair be carried out? customer bought a new one on this but i have another unit now doing the same.. is it a big job to strip these units down?
thanks

[scientist]

Re: FLE1016w Zanussi washing machine

Thanks for that…. cant seem to locate the codes. 🙂

[scientist]

Re: miele light fault

I bet you changed the door seal recently? connection block loose on bulb. 😉

[scientist]

Re: Hotpoint WD860 stops on 1 minute remaining

Whats the water pressure like? Had this on a hotpoint recently and this is what the fault was! Best of luck 🙂

[scientist]

Re: ADP4501/5 Whirlpool Dishwasher

yep I had a spare diaphragm switch which i offered up to the unit. No change. disconnected components one at a time to see if it was a faulty motor/heater/pump..etc. Still the same. As i said it is the second unit with this fault so thought someone might of come across this kind of fault. PCB me thinks….?

[scientist]

Re: Bosch washing machine WAE24465gb/01.

Couldn’t find one. Could I be dealing with fuzzy logic?

[scientist]

Re: Spare part for Samsung oven needed.

Just hope some one can define the issue with this model of oven. The repair failed on this unit. Again I have the same model of oven got a Pcb from a local supplier this time. fitted it today and ….nothing. power to the back of the pcb but still no display or functions. Seen posts about modifications to wiring? I know someone will put me straight here. Thanks folks. 🙁

[scientist]

Re: Christmas Lunacy

I do a half day Christmas eve up to 1pm…. dressed in my Santa suit!!! Hot but great craic.. and loads of tips. Ahhhh bit of fun for the day thats in it! 🙂

[scientist]

Re: Whirlpool adg7440 two flashes

Is that an over fill error. check the pressure switch /hose. Also check the wiring on the door lock.. Best of luck 🙂

[scientist]

Re: Siemens WTXL722CGB/05 Condenser Dryer

Element itself ok.. its the flicker rather than a flash that is happening. two lights at the same time… not sure if that is an error code?

[scientist]

Re: Siemens WTXL722CGB/05 Condenser Dryer

Have an issue with this model too. start/stop botton flickers twice with the drying indicator. Checked reset stat,ok. element seems fine…. where next? cheers just checked model number again… wtxl733cgb/05. opps! is it the same prodlem though??

[scientist]

Re: wf620 TEST??

model wf620. test on display. spins then stops door opens… mates machine so keen to get it fixed. thanks.

[Author]

Posts