Forum Replies Created
-
Posts
-
Re: Random Thoughts No.54
I agree totally with Andy and would like to add my appreciation for the behind the scenes work that is carried out on our behalf.
Victor.
Re: Help! Can’t get Neff panel off!!
Had a few of these baked in screws plus on various other makes, the only option is to drill them out as Gertrude says. Good luck.
Victor
Re: teka dishwasher a-dwf160
Does this model have 5 lights, that is one above each programme option?. I have module reset procedure for this type which says that the flow sensor is faulty (NOW GET THIS) even though there may not be a flow sensor fitted.
Had one a while back did a reset and cured problem, why the fault occurs factory coudn’t say.Happy to PM this to you.
VictorRe: Servis w/m door/interlock prob
Went to my Sat call had new lock and handle kit just incase, decided to try the tip from Deltra so removed the outer door trim only, closed door and hey presto machine works. Put outer door trim back on and problem returns. The trim is very thin and would do as a Rolf Harris wobble board, you can see it actually move and warp as you close the door and must hamper proper connection.
Removed trim again and yes it works, as the machine is in a utility room
customer is happy as long as it works and I can see no unsafe aspect with this solution. Customer admitted that under guarantee she called engineer out from Servis who after some deliberation said he did not know what the problem was and then left.Went out to-day to my other Servis as mentioned at start of this enqurie and carried out same routine and again it worked.
Thanks to all for your input.
Victor.
Re: Servis w/m door/interlock prob
Thanks for your reply Washman and Deltra will see how I get on with Saturdays call, now have a new interlock so will go back to previous customer and try this plus door trim thingy.
thank you both once again for your input.
Victor.Re: Hotpoint TDC30 T/dryer
Hi Andy,
Once I had a similar problem, heater and cut out/thermostat including front one checked out ok for continuity so was a bit stumped, decided to remove rear thermo and discovered it was concave so fitted new kit prob solved, have you actually removed the stats for a look?.
VictorRe: thomson twintub
Hi One of my customers has one of these t/tubs plastic body sort of blue and white in colour no heater and no wheels made in China and from Thmpsons.
She asked if I could fit wheels on which was no prob and she seems happy with the product. Paid just over £300 delivered from a dealer advertising in paper.Re: Indesit Franchise
Thanks Kevin for your input, I should point out that at the end of my conversation with Mr Indesit I had made my mind up that this was not for me.
The offer of sharing this information was that others may know what was in store should they be approached and I agree with you why pay someone to work for them. The long term outlook in my case is that I would be busy doing Indesit UK work and loose my good existing client base then they would have me by the washba**s.
Re: Servicepower
Re my earlier post, have now been paid. As I live in the glens of Scotland this was a round trip of 64 miles though I fitted in a few other jobs on the way. I charged Servicepower £43:00 for what was a 15 min visit in which the customer had knifed to death her freezer when chipping the ice off. Anyone who is interested in contacting servicepower here is the e-mail.
fsseu-service@servicepower
Good LuckRe: Servicepower
Hi, was asked to do an inspection job for them about two months ago, sent in report along with my bill never heard anything so last week e-mailed, a chap called Greg e-mailed back within hours to say the person I dealt with had left and after the easter holiday was trying to catch up with back log and could’nt find my invoice, asked me to send another which I did yesterday will let you know outcome.
