Forum Replies Created
-
Posts
-
Re: Serviceforce email wanted
sorry. it was late.. email for contract work someone phoned me and my wife answered but did not think to take down a number or email..
Re: smeg duco8css Main oven not working
I can not be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but i would guess that there is a thermal overload on the back near the bottom oven. Normally white with two wires connected to it.
Re: Bosch dishwasher flowmeter
Hi. Check that the little trap is in place inside the machine near the drain pump.if its the new type of drain pump it will try 3 times to drain before movine on. Take out the filter and have a look arou d and you should see it.
The flow meter is normally located on the pressure chamber behind the left hand panel.
Just a few screws and the panel pops off.Re: Fagor FSO500X oven thermostat
Send them a cheaky email and find out the part number
http://vi.raptor.ebaydesc.com/ws/eBayIS … 8700235294Re: Hoover dyn9164dpg
Hi. Has it jammed or just locked. I had one of these play up. The machine would finish the wash and the door lock open. Then after 2-5 mins it worl relock. Ended up being the pcb
Re: LG F1402FDS6 how to get the front off
https://drive.google.com/file/d/0BzQwyh … cslist_api
Page 47-52 i think. Worth a read from start to finish.
Re: Smeg oven, no fan element?
Hi. I have had a quick look and no one seems to supply a fan oven element. Just top and bottom. I have seen these before with just a fan in the back but can not remember if it was a smeg
Re: Bosch SMV40T10GB/14 integrated dishwasher fault
I have had this twice with two different outcomes.
1. The customer removed the cover in the sump and placed it in a pot on the window seal.
2. The main pcb had blown but managed to fix with a bit of wire and solderRe: Miele washing machine. Drum hits door seal
Hi. Went out to this machine again today and indeed it creates a vauccum when you have nothing inside it.
Took off the front pannel and placed on a spin. Then chucked a towel in while at around 600 rpm. The noise appeared for me this time and its the spider..
Resolved..
Re: Electrue and their discount software crash, is it just m
Hi. My qualtex account has been matched to meet or beat cdsl. It grips my sh1t when vdsl want me to but 5 elements to get the same price as qualtex.
Re: BEKO Washing Machine WM6355W 1500rpm Drum Bang and knock
Hi.
Have a go with nothing in it. It should just tumble on the start of a spin. If it goes into a full spin try looking at the back of the motor. Not the side with the belt. You may find the magnet on the back of the motor has come lose.
If not could be a pcb problem or wires to the motorRe: Mobile Payments
Never had a problems with paypal payments just the mobile signal is a pain where i live and customers don’t like to give out wifi login. I do however have a free pass to bt fon what works wonders.
Re: Beko DRCS68S tripping electric
Hi. Two things it could be
1. The element and thermostats have a fault
2. There may be some water floating about blow the element thats blown up to it and shorts it out when turned on.You can take off the back panel. A million screws and have a look. Remember to unplug it first
