Simon46

Forum Replies Created

Viewing 15 posts - 1,711 through 1,725 (of 2,216 total)
  • Author
    Posts
  • in reply to: Hoover drum lifters #161956
    Simon46
    Participant

    Re: Hoover drum lifters

    Thanks Andy. The plumber told the lady it would be drum out job!
    Model is HP6 150M.

    S.

    in reply to: HOTPOINT WMA 10 NO SPIN #161923
    Simon46
    Participant

    Re: HOTPOINT WMA 10 NO SPIN

    Just one garment? have you tried a half full drum load?

    S.

    in reply to: indesit omega 1200 #161742
    Simon46
    Participant

    Re: indesit omega 1200

    A boilwash may temporarily disssolve any sludge formed in the pressure vessel causing the machine to think it is full of water therefore no spin.
    Doyou periodically carry out 90degree washes?

    Regards
    Simon

    in reply to: Bosch S6R25B dishwasher #161841
    Simon46
    Participant

    Re: Bosch S6R25B dishwasher

    A selfbore plumbing in tap clamped onto pipework may be a quicker test option but these do give a reduced flow and are prone to scaling up eventually causing no flow.

    Regards
    Simon

    in reply to: HW120M not draining #161846
    Simon46
    Participant

    Re: HW120M not draining

    Sounds like a restriction in one of the hoses. Check out Repairs@ for a speedy quality service. If you are going to have a look yourself, unplug power before checking :zap:

    Regards
    Simon

    in reply to: Bosch S6R25B dishwasher #161837
    Simon46
    Participant

    Re: Bosch S6R25B dishwasher

    Try the higher pressure cold feed first

    Regards
    Simon

    in reply to: siemans w/dryer thermostats (drier stats) #161834
    Simon46
    Participant

    Re: siemans w/dryer thermostats (drier stats)

    http://www.bshappliancecare.com/Bosch/boschspares.html
    Tried Here?

    S.

    in reply to: UKW-Thank you #161767
    Simon46
    Participant

    Re: UKW-Thank you

    Today has proved this. I took time, looked back at what i had done today, and what i was doing a year ago. Amazing due to UKW. Appliances i would shy away from i am conversant in. E.G. Mistral with warm fridge (Think i bought the board to try). With UKWG’s invaluable help of course 😀

    S.

    in reply to: Wonder of the Internet #161829
    Simon46
    Participant

    Re: Wonder of the Internet

    Its great. Turn up to job never seeing appliance before forearmed with knowledge look good impress customer and get paid for it! You are then in their house (and their families/ friends) for the rest of your working days. It is scary from the customers point of view as you are a strange man in their home. Prove yourself and you will do well.

    S.

    in reply to: Make mine a double, and leave the bottle on the bar. #161830
    Simon46
    Participant

    Re: Make mine a double, and leave the bottle on the bar.

    It can only get better after that. Blo**y H*ll. Nightmare. 👿

    S.

    in reply to: Zanussi Jetsystem 1600 – No sounder at end of cycle… #160779
    Simon46
    Participant

    Re: Zanussi Jetsystem 1600 – No sounder at end of cycle…

    If not try here: http://www.serviceforce.co.uk/pdf_search.asp .

    Regards
    Simon

    in reply to: Indesit WIDL126S led fault code #161704
    Simon46
    Participant

    Re: Indesit WIDL126S led fault code

    It seems the machine has lost its programming. Will require an engineer. Check out Repairs@ for one

    Regards
    Simon

    in reply to: Bosch Condensor dryer – WTL6106GB probem #161645
    Simon46
    Participant

    Re: Bosch Condensor dryer – WTL6106GB probem

    What would the carbon brush do if worn and jumps off the drum momentarily on rotation?

    S.

    in reply to: whirlpool adp8322 d/w #161176
    Simon46
    Participant

    Re: whirlpool adp8322 d/w

    Was Spaghetti fom Spag Bol in the OWI. F4 reported intermittent then constant.

    S.

    in reply to: DWI 710 E1 board #160311
    Simon46
    Participant

    Re: DWI 710 E1 board

    Excellent 🙂

    S.

Viewing 15 posts - 1,711 through 1,725 (of 2,216 total)