Simon46

Forum Replies Created

Viewing 15 posts - 361 through 375 (of 2,216 total)
  • Author
    Posts
  • in reply to: HJA8362 dishwasher drains then does nothing else #361741
    Simon46
    Participant

    Re: HJA8362 dishwasher drains then does nothing else

    OVER FLOW INDICATOR about a fiver. Cheers mate.

    S.

    in reply to: HJA8362 dishwasher drains then does nothing else #361739
    Simon46
    Participant

    Re: HJA8362 dishwasher drains then does nothing else

    Replaced PCB still the same. It does have a flowmeter. Found 3 TAG microswitch in antiflood polystyrene float is burnt out. Not running drain pump but diconnecting supply to inlet valve. No water in base but a little noticed in tubes to antiflood. What would cause this? Overfoaming? What is part no of flood switch assy?

    S.

    in reply to: Zanussi WJS1665W rear half tub #361847
    Simon46
    Participant

    Re: Zanussi WJS1665W rear half tub

    1320769407 is part number on box.

    in reply to: Zanussi WJS1665W rear half tub #361846
    Simon46
    Participant

    Re: Zanussi WJS1665W rear half tub

    Mine is a washing machine not washer dryer. Sorry.

    S.

    in reply to: Zanussi WJS1665W rear half tub #361845
    Simon46
    Participant

    Re: Zanussi WJS1665W rear half tub

    I have a new one in box. Will have to check part number. Too cold to go to shed in dressing gown!

    S.

    in reply to: Fisher & Paykel DS603H dishwasher error 1 #360322
    Simon46
    Participant

    Re: Fisher & Paykel DS603H dishwasher error 1

    Cleared error codes swopped rotors from LHS to RHS dishwasher (she has 2). Both are reported operating ok?

    in reply to: Stoves 900em heritage lower main oven door spring #361058
    Simon46
    Participant

    Re: Stoves 900em heritage lower main oven door spring

    It just hooks into the l shaped hinge pulling the door to rear of oven and onto holes on the strut on the side at the other end on this one. Part fitted thanks anyway.

    S.

    in reply to: Candy CDB126 door opens itself whilst spinning? #361354
    Simon46
    Participant

    Re: Candy CDB126 door opens itself whilst spinning?

    Only 2 years? Two teeth on front of interlock that holds door catch broken. Interlock sorted it. This is the model with the pcb that falls out of facia when start pressed.
    S.

    in reply to: Fisher & Paykel DS603H dishwasher error 1 #360321
    Simon46
    Participant

    Re: Fisher & Paykel DS603H dishwasher error 1

    Received many thanks.
    S.

    in reply to: Fisher & Paykel DS603H dishwasher error 1 #360319
    Simon46
    Participant

    Re: Fisher & Paykel DS603H dishwasher error 1

    Have pm and emailed you.
    Cheers
    Simon

    in reply to: Fisher & Paykel DS603H dishwasher error 1 #360317
    Simon46
    Participant

    Re: Fisher & Paykel DS603H dishwasher error 1

    Or has anybody got any technical info they could send me?
    Regards
    Simon.

    in reply to: Hoover VHV380 #289982
    Simon46
    Participant

    Re: Hoover VHV380

    Heater only it was.

    S.

    in reply to: Hoover VHV380 #289981
    Simon46
    Participant

    Re: Hoover VHV380

    Inspected it heater burnt out in one hotspot. Heater on order as oc. Due to the fact that there was an inch thick of lint in the louvres of the wall vent! Hope thats all that it is!

    S.

    in reply to: Hoover VHV380 #289979
    Simon46
    Participant

    Re: Hoover VHV380

    Ive got one to look at today. Even on timed dry it cuts out prematurely. Anybody get a result on fixing one?

    S.

    in reply to: Bosch. VT59635 door hinge #358110
    Simon46
    Participant

    Re: Bosch. VT59635 door hinge

    Thanks martin she has bought a pattern doorseal but the hinge has epoxy resin around it which is cracking. tried to get access to posidrive screw using flexidrive but weight in way. Maybe time to walk away from this one.

    S.

Viewing 15 posts - 361 through 375 (of 2,216 total)