Forum Replies Created
-
Posts
-
Re: Neff G4521XOGB/01 integrated freezer replacement
Don the door hinges are on the side of the freezer and go straight to the decor door and fridge door is fitted to decor door if that helps. Obviously i am not up to speed yet posting from my mobile!
S.Re: Neff G4521XOGB/01 integrated freezer replacement
Don the door hinges are on the side of the freezer an
S.Re: Heater PCB relays: which ones do you use?
RS stockport out of stock of any 6V and 24. 12v ones ok.
Luckily i needed a 12V one today.S.
Re: hoover t/dryer vhc781 xtb
Lift pump fitted. Hard to get out of plate. Had to shave the plastic on the pump so plate with pressure switch on it would let go of it. 1hr stripdown 1 1/2 for putting it back together. Charge accordingly if you want to do this!
S.
Re: LAMONA HJA8704 WASHER DRYER 3180009709493867
Has the motor come loose? i received one for a Candy go and had to fit more screws and drill and countersink duct. motor had different mountings to original.
S.
Re: Hoover logic washer dryer cold inlet triple valve
If you have the lid off and are looking at the front of the machine the trickle valve output is on the rhs. is that the same as a wd62? A8552 is the model number. otherwise i need to get some hose.
S.
Re: Hot plate thermostat problem?
Sounds like there is a fault with the regulator under knob. The only other component is the limiter rod in the halogen unit. this switches on hob hot light and stops from overheating.
Power off if youre going in.Simon
Re: Smeg DF612SDX7 control module casing
Apparently on the 612sdx it showing the frame with the two fingers supplied seperately. This is the one with 5 light guides on frame.
Ah just found this
viewtopic.php?f=3&t=66769&p=328331&hilit=769350131#p328331Re: hoover t/dryer vhc781 xtb
Just had an enquiry for another not lifting water. After quoting him hes buying a new one!
Re: hoover t/dryer vhc781 xtb
I wish I had. The askoll lift pump failed. Everything has to come out!
S.
