Forum Replies Created
-
Posts
-
Re: Baumatic BWR1206 FC5d
Hi Allan , did you get this sorted i have a similar prob but this one sayes F7 motor fault ?? ive checked the motor it seems ok but no spin action
Re: electrolux EOG 7330 XN fan on always
yeah, it sends the cool air to the top of the cooker and across to the control panel, it comes on immediately as soon as the isolator switch on the wall is turned on is this right ? and it will stop after 20 mins ? i will say it to the customer thanks
Re: hotpoint FDM554P water inlet prob
nobody had this one before ? oh well i’ll just try the flowmeter
Re: ariston ald12uk wash cycle goes on for over 4 hours
ok so customer is back on again , comes to the end of a programne and just starts another one . also only 220v going to element nothing coming out ie no voltage across it , pcb im afraid
Re: zanussi zcv662mxc hob working only
ok thanks , but have you anything in plain english ?? i’d like to just know what colour wires go where without tracing every wire in the oven cheers k
Re: ariston ald12uk wash cycle goes on for over 4 hours
does anyone know what the resistance of the wash ntc on these is thanks
Re: zanussi d/w door seal
zanussi zdf 221s , nothing wrong with the trim retainer keeping the seal in place , just thought a bit of adhesive would keep it in place so the customer doesnt keep calling about it falling off cheers
Re: NEFF K3990X6gb/02 burnt out motor
i wish mate ,there are 3 places fo the connectors to go ,and 2 connectors but one of the places is a blank , the other 2 are the fan and the defrost heater , i only unplugged the fan cause the heater connector can stay put when you are taking the panels off the back wall , and they both have power coming out of em also
