Forum Replies Created
-
Posts
-
Re: whirlpool adp 4601 not heating
ok bad earth in the socket i was using , machine not live anymore ,
Re: whirlpool adp 4601 not heating
i’m still trying to find a solution to this problem , it seems the dishwasher has live current going through it when its plugged in , i have gotten a tingle when i touch the legs and it measures 12 volts ac on the meter , im thinking its leaking to earth , would that be right a component has let the current leak through it to earth ??? thanks again
Re: hotpoint CDT00P no heat
yep duff capacitor , this machine is poorly constructed 25 for 2 stats 15 for a capacitor , god knows what else will go !!
Re: hotpoint CDT00P no heat
ok it worked for a few days and now its stopped again wont even turn on ???any ideas thanks
Re: whirlpool adp 4601 not heating
ok i have had it with this dishwasher , i fitted a new control board today and nothing , works away fine but it wont heat the water , and the salt light is on also , does anyone have the correct resistance readings for the heating element thanks grrrrrrrrrrr!!
Re: hotpoint CDT00P no heat
what i’m saying is , will the elements heat even though the stats are blown ? surely the power still goes to the elements and they should heat , if the stats are blown the temp will not be regulated and they will keep heating , is this right ? or does the power go through one stat first if thats ok then it heats the element and power goes back out through the other stat which regulates the temperature ?thanks
Re: hotpoint CDT00P no heat
yeah i checked em , but they are on a silver cardboard strip and i checked the stats too and they dont show any continuity , so do i replace both ?
Re: whirlpool adp 4601 not heating
jaysus doc that sounds expensive now alright 30 for ntc and 70 for control board crapola , i dont think the owner of this machine is gonna be happy
Re: whirlpool adp 4601 not heating
ok new ntc fitted , still no heat , 3 flashes on start button led when it stops , read the fault codes and it means heater problem , heater relay on control board faulty or cabling problem , does anyone know where the heater relay is thanks
Re: hotpoint FFA 45 W
ok fridge is frost free , turning on ok but digital display is still wacko , none of the button do anything except the on and off freezer is freezing saying – 18 on the display and fridge is at + 8 fridge is not getting any colder ??
Re: whirlpool adp 4601 not heating
had a go again today , couldnt make it go into diagnostic mode , took off front control panel and had a look at main board looks fine no visible marks or burns , machine running fine just wont heat water ?? i guess its just a case of gettin a ntc and tryin that !
