Forum Replies Created
-
Posts
-
Re: Indesit Iwdc 6105
Cheers again Dave, my eyesight is very bad couple that with a new smartphone and heyyyy, oh and the led flashing is the start pause, as if it’s paused!
Re: Indesit Iwdc 6105
Cheers again Dave, my eyesight is very bad couple that with a new smartphone and heyyyy,
Re: Belling cooling fan stuck
I’ve tested power at the fan motor terminals , 220 and with the wires off the fan motor 220v , then suspected a neutral fault so I ran wire fro the main incoming neutral to the fan motor terminal, with it’s own live and also read 220v , the fan motor is faintly buzzing and is getting warm , the neutral is coming from PCB so why then is it not working with an external neutral this is what I can’t understand
Re: Belling cooling fan stuck
I did a test with leads on and off fan Dave , I also took a neutral from the main connector box coming in , in all cases it read 220v on my meter I’m stumped here the only thing I didn’t do was take a fly lead to the fan , I will try that
Re: Belling cooling fan stuck
Hi Dave , I have 220 across the tags alright a live and neutral, the neutral coming from that PCB mentioned, and the live coming from the main switch and through a temp cut out , I’m a bit puzzled all I can think is its not getting the amperage also the neutral from said PCB is always on , as soon as the oven is switched on its live , I would have expected at 80 degrees it strarts up cooling ?
Re: liebherr larder fridge interior light wont stop flashing
I was thinking in that direction I just needed the expert opinion cheers pal
Re: Liebherr ICBN3366
cheers , magnet was missing even though customer maintains there never was any there, i just used a piece of old fridge door seal all worked ok just need to find a permanent one now thanks for the help
