Forum Replies Created
-
Posts
-
Re: Panasonic M/wave NEC1275
Hi Andy,
I went back today, the lady ho does most of the cooking was there this time. She has said that they always leave it switched on at the wall. It always seems to fail the next morning when they first go to use it. They open the door, put the food in, close the door, and then it goes off when they start to program it. Sure enough the fuse had failed again, I opened it up and it has just opened the fuse wire.
The only other thing I can think of changing is the switch carriage.
MervRe: Panasonic M/wave NEC1275
I know what you mean about intermittent faults, I seem to have had my fair share just lately. It used to be plugged into an ext lead, but I was a bit wary of that. They have done away with the ext lead, but the m/wave is now plugged into the socket that the ext lead was plugged in to.
MervRe: Panasonic M/wave NEC1275
I last went to it last thursday, got a call this morning saying it was dead again.
It is a ceramic fuse.
Thanks
MervRe: Panasonic M/wave NEC1275
Thanks for the replies. I have checked this and have replaced the fuse with a time delay fuse.
MervRe: Panasonic M/wave NEC1275
It would appear that when they switch it on at the socket and go to use it, the unit is dead. The trouble is it only seems to happen every 7-10 days.
MervRe: Electrolux EOB5600B oven not heating yet grill works fin
The parts diagram definately shows a fan element 😕 . Inside the oven there is a back plate that has 4 screws retaining it, remove that and it should expose the element.
MervRe: Bosch Microwave Oven – HBC84K550B/01 E8 Fault
or faulty mag and inverter blown the fuse, had one last week do the same.
MervRe: A long shot!
Hi Dave,
Thanks for your help.I’ll have to arrange to go back and have a look at the clock and get the details. IIRC it was a two button clock with a turn knob, don’t know if that rules any out.
Merv
