twinspark

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 95 total)
1 2 3 … 5 6 7
  • Author
    Posts
  • January 3, 2010 at 10:09 pm in reply to: hotpoint wf250 #307305
    twinspark
    Participant

    Re: hotpoint wf250

    CHECK THE MOTOR WIRRING AND TACHO WIRE 😮

    December 3, 2009 at 11:38 am in reply to: indesit w103 #305504
    twinspark
    Participant

    Re: indesit w103

    MOTOR OR MODUAL
    USES MOTOR NEUTRAL TO LOCK DOOR

    December 2, 2009 at 8:02 am in reply to: zanusi #305368
    twinspark
    Participant

    Re: zanusi

    thanks every one 😮

    November 29, 2009 at 4:29 pm in reply to: Merloni subcontractors #300648
    twinspark
    Participant

    Re: Merloni subcontractors

    thats been happening since summer 2008 😥

    November 24, 2009 at 7:26 pm in reply to: hotpoint sdw60 led4 flashing #304705
    twinspark
    Participant

    Re: hotpoint sdw60 led4 flashing

    and circ motor
    and supressor wirring melting on heater 😯

    November 23, 2009 at 8:00 am in reply to: cda dishwashers #304390
    twinspark
    Participant

    Re: cda dishwashers

    MODELS ARE
    CW 448
    CW 496/1
    THANKS

    November 22, 2009 at 9:33 am in reply to: cda dishwashers #304389
    twinspark
    Participant

    Re: cda dishwashers

    i have both sizes
    faults appear to be no heat ( heater and ntc are fine)
    the 45 cm seam not to start programm just pump and fill>
    model numbers to follow
    🙁

    November 21, 2009 at 6:58 pm in reply to: Ariston A1636 no fast spin #304307
    twinspark
    Participant

    Re: Ariston A1636 no fast spin

    check thr motr harness for bad connections if ok , you will need modual 🙂

    November 21, 2009 at 6:56 pm in reply to: Hotpoint future FFA90 fridge freezer #304309
    twinspark
    Participant

    Re: Hotpoint future FFA90 fridge freezer

    door seal or liner cracked 🙁

    November 21, 2009 at 6:50 pm in reply to: dwf33 top spray arm #222278
    twinspark
    Participant

    Re: dwf33 top spray arm

    check the white nut at back of tub 😮 has a seal in it

    November 21, 2009 at 3:35 pm in reply to: wf340 #304303
    twinspark
    Participant

    Re: wf340

    BOARD FAULT 🙂

    November 16, 2009 at 2:09 pm in reply to: Hotpoint WD860P F13 fault #303871
    twinspark
    Participant

    Re: Hotpoint WD860P F13 fault

    if it has filter in condenser can be just that 😀

    November 15, 2009 at 11:18 am in reply to: CREDA Simplicity T622CW condenser dryer #300387
    twinspark
    Participant

    Re: CREDA Simplicity T622CW condenser dryer

    Hi ya is the condenser clean??

    November 15, 2009 at 10:13 am in reply to: meggers #303326
    twinspark
    Participant

    Re: meggers

    I think in our trade we should make sure everthing we repair is left safe for our customers to use, we should all use meggars 😀

    November 14, 2009 at 8:34 am in reply to: meggers #303320
    twinspark
    Participant

    Re: meggers

    i test every appliance and have done so since i started repairing morphy richards toasters in 1976 🙂

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 95 total)
1 2 3 … 5 6 7