Forum Replies Created
-
Posts
-
Re: RC21DCNS Samsung Fridge Freezer Trips FUSE BOX
might be the new element fitted the snagged it while fitting causing a earth fault
Re: Indesit C239 NFUK
That danfoss compressor is prone to failing , the crankshaft snapps due to no oil strainer being fitted when the compressor was made 🙁
Re: Ariston AWD12 Advantage bearings
agreed !!!most of my expierance they will clean up and give good service and to have bearing to hand means the job is done first time not waiting for bits etc CUSTOMER HAPPY
😀Re: Hotpoint WD860 – F-04 error?
with machine upplugged check you have good connection in the pump two way plug and the same in the bottom 7 way plug on modual that harness does fail. one end goes into motor then twoo off to pump
then to modualRe: Ariston AWD12 Advantage bearings
if you roemve the pulley nut and pulley you can work out what bearings you will need 😛
Re: Indesit WIE137 s uk “DOOR” error
make sure the latch pin inside the door is located (inside the door trim) 😮
Re: indesit slimline dishwasher
if you can read about 30 ohms from the modual using the two cables bottom l/hand corner you need a modual 🙂
Re: Hotpoint FFA74 – fault-find assistance required
evap fan will not run untill the evapourater is -15 and they defrost every 18 hours of compressor running time
I think you have a system fault
