[twinspark]

Re: hotpoint wd 640

can give me the comercial code 5 digits on back of cabnet bar code ❓

[twinspark]

Re: wdl520 and wdl540

console board does thi 😀 s fault

[twinspark]

Re: Hotpoint WF321 Panel Lights Constantly Flicker

main board gone did two to day 😀

[twinspark]

Re: Hotpoint SDW60

could also be the wirring harnesss have had this one befor withh that model 😀

[twinspark]

Re: VTD20

drum and rear panel best cure.
Belts too tight they should go back to pullies and springs 😛

[twinspark]

Re: Indesit WIB111/UK

this modual fits coo272261 but i can be more sure if you find the 5 digit comercial code (46470)
they are all differant and model numbers are not the best way, neil 😀

[twinspark]

Re: Creda IDI60 not filling with water

i think your nain motor is stuck or seized

[twinspark]

Re: Help with Hotpoint AQXXF 149 – can’t get the filter off

if you have some thing jamming the filter [plug from unscrewing you might have to break it to get blockage out

[twinspark]

Re: Bosch WFO 2260 Wont Spin

easier to do if you remove the motor and make sure you get the chamfer of the brush the right way round, good luck 😀

[twinspark]

Re: 2 different error codes on my Hotpoint WD640 (p?)

purfect fix is to change the board 😀

[twinspark]

Re: Hotpoint VTD20P Tumble Dryer

only if your machine has teardrop bearing, then its ok to leave off the copper strip 😀

[twinspark]

Re: Hotpoint Aquarius Extra WMA44P – PCB Program

yes send me your model, and pcb used 😮

[twinspark]

Re: Hotpoint TC71P condenser drier

its the relay 😮

[twinspark]

Re: hotpoint wt400

motor faulty i think

[twinspark]

Re: Creda 48171 Gainsborough Grill Problem

its your simmer stat( two feeds )one to fan then to elements.
some models have door switch ,on the door hinge

[Author]

Posts