waters

Forum Replies Created

Viewing 15 posts - 196 through 210 (of 242 total)
  • Author
    Posts
  • in reply to: insulation test #224111
    waters
    Participant

    Re: insulation test

    Any less than 20m and i replace armature.I have tried cleaning up but never found any change.Any tips? . What i was wanting to know is was i throwing away good armatures.If it was a repair then no problem but on recons the cost is important.

    in reply to: Has WEEE affected anyone yet? #222032
    waters
    Participant

    Re: Has WEEE affected anyone yet?

    I wait until i have 8 scrap machines and then take to scrapyard and receive about 50 pounds

    in reply to: ffs 70 #217860
    waters
    Participant

    Re: ffs 70

    No build up of ice,but still no rise in temp showing a defrost

    in reply to: fault codes pdf #212270
    waters
    Participant

    Re: fault codes pdf

    please send me one

    rbappliances@ntlworld.com

    thanks

    in reply to: ffs 70 #217859
    waters
    Participant

    Re: ffs 70

    Is a Service manual available from anywhere

    in reply to: ffs 70 #217858
    waters
    Participant

    Re: ffs 70

    The Mistrels defrost after 10 to 12 hours,raising the freezer temp to around-5 should i see the same with this model

    in reply to: ffs 70 #217857
    waters
    Participant

    Re: ffs 70

    Do these defrost within a 24 hour period.I have had a thermometer in freezer and it is constant -20,with no drop so when do they do a defrost

    in reply to: ffs 70 #217856
    waters
    Participant

    Re: ffs 70

    Yes thank you very much

    in reply to: ffs 70 #217854
    waters
    Participant

    Re: ffs 70

    It has a separate high temp alarm with light,this alarm i am asking about is a switch with a light on the other end of the top panel,saying defrost food alarm.
    When i first put the fridge freezer on both were lit,after it got up to temp,the high temp alarm went off,but the defrost food alert was still on,until i switched it .
    If this is the one you are on about sorry,i cant see why the two,where would i get an instruction book,thanks

    in reply to: Arrrrgh #212372
    waters
    Participant

    Re: Arrrrgh

    Currys drivers are trained around our area for installation.Friend had 2 weeks training before going on the road.He was there a couple of weeks and has been off since because he fell off the lorry

    in reply to: Fiber Glass Matting Repairs to Plastic Outer Tubs? #212355
    waters
    Participant

    Re: Fiber Glass Matting Repairs to Plastic Outer Tubs?

    Qualtex works every time,i have used it many times even on large holes

    in reply to: hotpoint ffa60 #206024
    waters
    Participant

    Re: hotpoint ffa60

    Thanks,only been running a day so looks like pcb then.

    in reply to: Mistral Frost Free Fridge Freezer Loud Noise #204595
    waters
    Participant

    Re: Mistral Frost Free Fridge Freezer Loud Noise

    will maybe return in short while

    in reply to: any tips #204060
    waters
    Participant

    Re: any tips

    Been reconditioning washers 10 years.First time i have had a problem with violent customer so refunded money.ran perfect before, and after delivery but moved in his kitchen,did not spin fully.Checked at his premises and machine just glided on his floor,even though level and not turned on.Moved machine out a bit and it stood solid,but loads of abuse and threats.

    🙂

    in reply to: Connect #202196
    waters
    Participant

    Re: Connect

    Yes back in stock now but all went out of stock when i posted.I had been waiting for the heaters for ages and when they arrived the others were out
    Heaters pattern 4.99 genuine 9.60. I was asking because usually these items are always in stock

Viewing 15 posts - 196 through 210 (of 242 total)