[waters]

Re: hotpoint wf

The legs on this machine are the same ones as on the WMA.
I see the ones shown for this model on Qualtex are the newer type.Does it matter which to fit .This model is WF54

[waters]

Re: hotpoint wf

Checked everything and put allot of grease on legs,still knocks.Pushing down hard on the drum when on full spin stops the noise,will order new legs unless any other ideas.If it is the legs i will have to order allot of them because most of the 1400 spin machines i am getting suffer from this.

[waters]

Re: Yet another gripe at connect.

5031682621806 is 7.77.I wonder if any 2 people have the same price

[waters]

Re: hotpoint wf

Thanks will try today.I am getting more and more of these machines to recon so i have go to get to the bottom of it .It is all the high spin machines that i have this problem with.Thanks

[waters]

Re: hotpoint wf

Thanks ,All the 1000 and 1200 spin machines that come in are fine but the 1400 seem very noisy on 1400 spin.The concrete in bolted on tight but the noise seems to be from there.

[waters]

Re: Hotpoint WD440

Changed the 3 cold inlet valves and the machine went through a complete cycle ok.The clothes were rather damp though after 90 minutes drying.

[waters]

Re: Hotpoint WD440

Thanks for help,i will replace the pump to be sure.When the fault occurs i stick it to spin and it drains and spins but will change pump and if not scrap

[waters]

Re: Hotpoint WD440

No pump block.Machine works perfect on washes,this only happens on dry

[waters]

Re: Hotpoint WD440

I changed pressure switch.It does full wash ok and dries fine for so long then lights flash and when i open door the drum has 6 inches of water in it

[waters]

Re: TomTom warning

Which maps do you need

[waters]

Re: Trade Insurance

Direct line do various packages.I had trouble getting cover because i sell recons and repair.They were the only one i could find that did product and public liability and shop insurance.

[waters]

Re: TomTom warning

Mine does not have an SD slot but i can get the maps

[waters]

Re: Yet another gripe at connect.

Spares prices from them keep rocketing.Wma interlocks have gone from 1.99 to 3.39 in the last week.Their pattern Hotpoint Wma door boot to me are 8.87,which is over a pound dearer than an original.I was told by a rep that i am a dying breed because i recon machines and they concentrate on other things
They have a huge stock so if they wont give me discount i will use them just when i need a spare that no one has

[waters]

Re: help with Hotpoint WF340

I did not connect it up or take it out.I did notice that the pipe from the sump to the pump was weeping very slightly at the pump connection .

[waters]

Re: help with Hotpoint WF340

Exchanged the machine,got the machine back to workshop and now cant fault it.Machine start light normal and no flashing lights.Put it through a couple of washes and all ok.Can anyone explain what would cause this .

[Author]

Posts