Forum Replies Created
-
Posts
-
Re: BOSCH DISHWASHER SGS 43C12 GB/08
ok so if its timed how does that cope with water flow rate into machine
Re: Customer Charging
Well for fifteen years we have advertised no call out charge and charge currently £39.00 for the diagnosis of fault and estimation of repair cost.If the work is carried out thats the cost,if not required or deemed uneconomic we charge the £39.00.We even charge the £39.00 and let them consider over a day or two and return to carry out the repair and charge the balance.I have always considered this fair and because we charge I think that professional,financially unbiased opinion should and is given.
The reason for this posting is that possibly the understanding of no callout charge and what the customer expects for this may have changed in recent years or maybe its me and have got it totally wrong.
I should add that all new customers and a lot of existing ones are told of our charging as they enquire and book service visits.all views welcomed
Re: Customer Charging
ok so let me be clearer in order that you can be also.Is no callout charge expected to cover the cost of arrival,diagnosis and the refusal by the customer to have the work carried out…..totallly free!!
Re: HOOVER DISHWASHER MODEL HND 315 80
upon further checking it appears the click is not the pressure switch but the flow switch.as it pulses between fill and wash pump the cycle indicator dims.Looks as though it may be the circuit board,no obvious signs of burnt joints but discoloured components and pcb
Re: Indesit Condensor Dryer G75cs
Well now that didnt hurt did it 😀 Many thanks for that
kind regards
Steve 8)Re: Indesit Condensor Dryer G75cs
Ok so youve slapped my wrist,is there an answer in there waiting to burst out, info shared is a trouble halved
Re: Blomberg washing machine 1305abb
Agree with you but i suspect it was dropped on manufacture or poor casting.In thirty years of servicing i have never needed one
Re: Ikea/Whirlpool dishwasher 60cm wide and integrated
Thankyou and all your team for your support on this one,at a time when a lot of manufacturers have abandoned Trade support its nice to know there is a lifeline when you need it.
Re: Ikea/Whirlpool dishwasher 60cm wide and integrated
flow meter and valves are ok.Is the fill level controlled purely by pulses from flow meter to control unit or does another device get used.the machine fills to an initial level when the wash pump comes on it continues to fill,doesn’t stop filling and then defaults with nine flashes.I should point out that at cycle start the drain pump comes on together with water.Its like the fill valve has a permanent live supply ❓
Re: Ikea/Whirlpool dishwasher 60cm wide and integrated
refitted flow meter and metered reed switch whilst filling at slow water flow,switch is pulsing ok.started cycle again with water supply off and this time got six flashes which is probably time out?When your ready ,,thanks
Re: Ikea/Whirlpool dishwasher 60cm wide and integrated
have watched turbine wheel flying round in manifold,is that a magnet in the centre?also checked continuity through reed switch with magnet
Re: Ikea/Whirlpool dishwasher 60cm wide and integrated
when machine defaults because of overfill start flashes nine times
