- This topic has 195 replies, 18 voices, and was last updated 15 years, 2 months ago by
.
-
Posts
-
Re: zanussi zwd147s tub seal seems an odd one
just had another thoght , does it make any difference how long the water inlet pipe is? i have had to use the outside tap to connect it to the washer to test it , the pipe is about 7 metres long as the washer is in the conservatory. ❓
Re: zanussi zwd147s tub seal seems an odd one
i forgot to say thanks for that Seamy
i`ll have to leave it till tomorrow now as the light in there is crap! 🙂Re: zanussi zwd147s tub seal seems an odd one
sussed it 🙂 i had the drain pipe too low, its all working now , just got a bit of a leak somewhere but i dont think its the drum seal or anything to difficult to put right. so you could say i`ve finnished 😮
now for the dishwasher. only joking thats working fine (touch wood). once again thanks everyone for all your help, i couldn`t have done it without you. literally! 😀Re: zanussi zwd147s tub seal seems an odd one
stryder wrote:once again thanks everyone for all your help, i couldn`t have done it without you. literally! 😀
You’all be sure to come back now ya’hear?…….. Happy washdays! 😀
Re: zanussi zwd147s tub seal seems an odd one
:waving: stryder,
Its almost like your favourtie tv series coming to an end :joker:
Seriously, well done for your perserverance, i bet a lot of folk wouldve :violent:
As martin said you’ll get a ‘welcome back’ if you need the assistance of the guys again 😀
best wishes to you and yours
quickwash :plug:
Re: zanussi zwd147s tub seal seems an odd one
Shame Stryder has gone 😥 Lets hope England win tonight to soften the blow 🙁
Graham
Re: zanussi zwd147s tub seal seems an odd one
Turbo wrote:Shame Stryder has gone 😥 Lets hope England win tonight to soften the blow 🙁
Graham
Stryder never made it to the biblical proportions of Evren Yursten!
Oliver.
Re: zanussi zwd147s tub seal seems an odd one
H.W.L.
You beat me to it whilst I was looking for THIS THREAD You popped up the reminder.
That will send Martin to the funny farm for sure.
Alex
Re: zanussi zwd147s tub seal seems an odd one
Alex wrote:H.W.L.
You beat me to it whilst I was looking for THIS THREAD You popped up the reminder.
That will send Martin to the funny farm for sure.
Alex
I don’t think anyone could beat that thread Alex. That is by far the most impressive bearing change I have ever seen!
Oliver.
Re: zanussi zwd147s tub seal seems an odd one
iadom wrote:
I think Martin is trying to get this thread to rival an all time epic. If you have read War & Peace then THIS should be a doddle. 😆
I did try and draw comparisons with our friend Evren earlier in this thread, Evren also had quite an interesting thread about his Candy Alise timer as well. 😆
Jim.
Re: zanussi zwd147s tub seal seems an odd one
ah, but wait, i still have one more question, you don`t get rid of me that easily 😆 –as i said before eveything now working fine, i fixed the leak, it was leaking from where the water heater fits into the drum , i just pushed it right in and tightened the nut on it and put some silicon on it for good measure. seems have done the trick.
anyway the dryer element needs changing as its not drying very well if at all . i checked the resistance with my multimeter but wondered if anyone could give me anytips on testing this further just to be sure before i order a new one?
do you think i should have put this in a new thread or is it ok to keep this one going?
- You must be logged in to reply to this topic.