adamhornsby

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 255 total)
  • Author
    Posts
  • in reply to: Hotpoint washing machine #240327
    adamhornsby
    Participant

    Re: Hotpoint washing machine

    I dont think that it would need a look, since it has been used previously before we acquired it, as it is around 6-7 years old, the damage should already have been done if it were about to happen wouldnt it?

    in reply to: Hotpoint washing machine #240325
    adamhornsby
    Participant

    Re: Hotpoint washing machine

    How do we get into the machine, the back and sides, how do they come off?

    in reply to: Hoover New Wave Making Strange Sounds #228704
    adamhornsby
    Participant

    Re: Hoover New Wave Making Strange Sounds

    At the weekend, we thought we had cracked our overheating problem. The machine successfully completed a 2 wash without any problems whatsoever. I try it today, and about an hour in, it starts draining, and all the lights start flashing, opened the door, and the water didn’t seem boiling, but about 60 which it should of been. While it were flashing, i could not do anything with it, so i turned it off with the button, and when i switched it on, the ‘extra rinse’ light came on, and the machine started taking in water.

    What is it doing and why?

    in reply to: Hotpoint WF240 Washing Machine – Flashing LED’s #230494
    adamhornsby
    Participant

    helo_75 wrote:where r u based:P

    i need some good quality flashing lights for the xmas tree, and i know hotpoint wont let me down

    just set it to a wash and watch em flash!!

    Thats if it doesn’t break down before then, we know how bad they are..

    in reply to: advice please #235690
    adamhornsby
    Participant

    Re: advice please

    Well, I’ve tried it out this morning, and was very impressed. I think Jim might agree, but the Braun gives a very close shave, unlike the Philips and my face wasn’t left dry and sore unlike with the Philips.
    Cleaning function is good, and all round I am impressed with it. Although the shaver and the cleaner are very noisey, not good to clean the shaver at night.

    in reply to: recomendations for new integrated washer #235931
    adamhornsby
    Participant

    Re: recomendations for new integrated washer

    Depends really, as Don said, both manufacturers are good in their field. Personally, if it was upto me, I would go for the Neff.
    If you take a look in Magnet, you will find both the Neff and AEG machines.

    in reply to: recomendations for new integrated washer #235929
    adamhornsby
    Participant

    Re: recomendations for new integrated washer

    Do you really need an integrated model? For the same price as an integrated one, you can get a freestanding model, loaded with a better spec.

    in reply to: advice please #235689
    adamhornsby
    Participant

    Re: advice please

    I got it! Went to Meadowhell today, and bought it, from Boots. Looks very stylish when I got it out of the box, looks susprisingly easy to use too. Its also very good to see it has been Made in Germany, shows Braun still have some values.
    I haven’t had a chance to try it out yet, will have tommorow morning, so I’ll report back tommorrow afternoon.

    in reply to: advice please #235688
    adamhornsby
    Participant

    Re: advice please

    Ohh, is that guy Penguin?

    Me confused, it doesnt take much doing. 😕 😉

    in reply to: advice please #235686
    adamhornsby
    Participant

    Re: advice please

    What about him Penguin?

    in reply to: advice please #235683
    adamhornsby
    Participant

    Re: advice please

    Hehe. Who is that, any of you guys? No, I shave because the hairs obviously look unsightly, and well they dont impress the lasses, nor would I look the part in my new job.

    in reply to: advice please #235681
    adamhornsby
    Participant

    Re: advice please

    How do you mean by that Penguin?

    in reply to: advice please #235678
    adamhornsby
    Participant

    Re: advice please

    Jim, I do need a shaver, believe me. I’m currently using a Philips, an old one of my dads. He has used Philips shavers ever since he started. But I’m not entirely struck on this one, it doesn’t seem to cut properly. I know Braun have been around for yonks and make very good hand blenders, but what are the shavers like, i think it was the 8985 i have seen, and it will have to be an investment, i will be using it for a long time.

    Does the foil work better than the cutters, the cutters don’t seem to get all the stubble, unless they are blunt or its just me doing the whole thing wrong?

    in reply to: Henry #231996
    adamhornsby
    Participant

    Re: Henry

    Do they make carpets too?

    in reply to: Henry #231994
    adamhornsby
    Participant

    Re: Henry

    Who are Vorwerk?

Viewing 15 posts - 46 through 60 (of 255 total)