Forum Replies Created
-
Posts
-
Re: Samsung srs616dhss not staying cold
Hi
Your fault is the same as what has effected the RS21 range off appliances here in the Uk. Your australian model has the same fault.
It will need a heater,fuse,sensor and evaperator cover which your local samsung can supply.
Bryan
Re: ISE-2 Vestel pcb
Hi Iadom
I think I may have one..have you got a pic of it or the front of the machine ?
Bryan
Re: HMV
I think you will find that hillco have bought the debt, 1st step to ownership, and continuation of trading
That’s what they said about comet and mfi 😆 And numerous other companies.
Bryan
Re: Rosieres 4040db neon light
Hi Sandy
neons with a slight glow is common with the 4040 and does not affect the operation of the cooker. i have seen them running for years.
The tripping could be due to a 13amp being used but it could also be an electrical fault on the element.
Bryan
Re: February 2013 Meeting
Looks like I have been able to get a calibration company to attend with a special deal for calibration.
Can you please let me know if you are interested.
Bryan
Re: February 2013 Meeting
Jazzmeister wrote:I had to book different rooms as eat ones were all gone!
Eat or twin ? . I’ll try to sort it when you arrive.
Bryan
Re: Rosieres 4040db Oven Temp accuracy
Hi
oven must be empty of everything and switched on for 1 hour at 200oc and there is tolerance of 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the max temperature.
you have to note the temperature the thermostat switches off and on then cycle for about 4 cycles then add together and divide by the amount of cycles to get the correct average temperature.
Ie on 200 0ff 220 on198 off 223 on 420 off 421 add 420+421 ±4 = 210oc which gives you the operating temperature. can’t find the divide key.
Bryan
Re: February 2013 Meeting
is their anyway to drop them an email to confirm we get breaky in wta group code
I confirm it.. if it’s not then I will pay for it.. The receptionists dont always know whats included on the codes.
Bryan
Re: Rosieres Bocuse oven door runners – how to get at?
Hi
There are holes along the drawer runner sides..
Bryan
Re: Rosieres Bocuse oven door runners – how to get at?
Hi
Drawers out at the bottom.. undo the screws and let the old ones fall down away.
new ones will need to go up into the side cavity using string put down through front holes and then pulled back up with the new receiver.
inside ones the same or loosen the front black panel and pull GENTLY forward and fit.
You will also need to change the hinges as they become bent and out of shape and will wear the new hinge receivers down if hinges are not replaced.
Bryan
