Forum Replies Created
-
Posts
-
Re: Samsung Rsh1dtmh capacitor
Hi
Connect without the capacitor and it will work without a problem.
Bryan
Re: WTA 2017 conference
Hi All
The rooms have been going and the amount of rooms are now getting short. If you have registered and haven’t booked your room yet then do so as you may find you’ll have to take a room down the road.
Hope to see you all there.
Bryan
Re: Buying a kitchen ceiling extractor
Hi Kevin
If you are having it fitted next month then you need to start planning this before they start. Do you have the kitchen drawings ?
Or you can call me on 0844 504 8326 during office hours and if i’m in I can talk you through your needs. If i’m not in I can call you back.
Bryan
Re: Candy GC4 1461 D1
Hi
It’s E3 error :
The Water Drain Phase was not completed within the designed limit time. Clogged Filter, Drain Pump, Drain Hose, Wall Discharge and/or Wiring.Check that the air bottle is clean and not scummed up also the waste pipe clogged up with scale.
Bryan
Re: Buying a kitchen ceiling extractor
Would you say that Pando is better than Elica or about the same.
Pando far superior in every way. They are actually hand built and tested right along the production line and full test carried out just before they are boxed up and it is a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} test on all functions.
Reliability is second to none.
Bryan
Re: Buying a kitchen ceiling extractor
Hi
Any ceiling hood worth putting up will be costly.Pando Cooker hoods are good and reliable..
They must also be ducted to the outside or your wasting your money as it’ll be cosmetic use only.Bryan
Re: Mercury RC1090 weekday oven door seal
hi Jim
I believe that I am the only one that has stock of these seals.
E mail me.
Bryan
Re: Spade connections on John Lewis Integrated Fridge
Hi
Model Serial number and product number would help .
Re: Samsung RS21 temperature rising after repair
Hi
You’ll find that it’s back to normal in the morning..Stop opening the door.
Bryan
Re: Samsung RS21 temperature rising after repair
Hi
How long ago did you fit it ?. Its takes more than 8 hrs to get down to temperature .Did you fit ALL the parts and in the correct position ?.
Bryan
Re: What manufacturer??
Hi
The internals of the induction hob will be basically the same in virtually any induction hob just the cosmetics or the size and position of the pan.
As for the oven then I would recommend a steam multifunction oven.. It takes a bit longer to get used to using it correctly but the meats and re heated food comes out far better than a microwave or normal oven.
Refrigeration wise. It’s liebherr all the way.Yes more than some but worth while.
Dishwashers.. Don’t go for the cheap bottom range ones but a mid priced one..You may think paying another £50 – £70 will get you a better unit but not really. look at about £400 – £600.
Extractor ( cooker hood ) then this is a must to be fitted to go through the wall to the outside direct using solid plastic extruded plastic,If you have availability to use an external motor then this will be far better and quieter. If not then its gonna be as much use as a chocolate tea cup an will only be a cosmetic appliance.
Bryan
Re: Return to work
To be honest, not much has changed really, same old same old really.
Just a bit more grumpy 😛
Welcome back
Bryan
