[admin]

Re: Fridge freezer not getting cold…… please help

Common fault on this model is the defrost timer BUT without going through tests it can’t be confirmed.

Turn it off for 24 hrs and leave the freezer door open and then restart it as normal,If it happens again then the fault would normally be in the defrost area.

Bryan

[admin]

Re: Samsung SRL628ev fridge deodoriser

Hi

To be honest…save your money.they arent worth the money and don’t really do anything you would notice.

Bryan

[admin]

Re: CURRYS KNOW HOW

repair care’s answer:

Thank you for your feedback on this matter

To provide some detail on Currys Knowhow re-branding recently introducted

>Knowhow replaces the Tech Guys format introduced by Currys several years ago.

>Tech Guys are now know as Currys Knowhow.

>Currys transport and stores are being re-branded in a new Knowhow format.

>From Repaircare’s point of view-we have had to change the way we answer incoming service requests.

>Will Currys take all the work away-we do not believe so. In fact we believe this re-branding will build our relationsip with DSG.

>We will be publishing a presentation to all SPs regarding Knowhow in the very near future. At the same time we hope to update all our SPs regarding the ongoing discussions with DSG regarding rates. At this stage we can indicate that these discussion are hard, ongoing, but moving we believe, in the direction we require.

[admin]

Re: Samsung srl3928b problems F/Freezer problems

Hi

Simple fault…Defrost heater open circuit.

e-mail me r600a@ffrservices.co.uk for parts and cost.

Bryan

[admin]

Re: LG WM-1280FHD washing machine.

Hi

Carry out a few boil washes without any powder or clothes in.it may well be youve got a build up of sludge which sometimes can be cleared or may need a engineer visit.

Bryan

[admin]

Re: GE GCE23LGWAFSS

Hi Chris

Ive got them in stock.You,ll also need to change the fan motor at the same time though.

e-mail me

Bryan r600a@ffrservices.co.uk

[admin]

Re: bosch oven hbn730550b/03

went back fitted pcb…….and all was good again..

[admin]

Re: September 2011 UKW engineers meeting

Ok

As there has been no objections or rejections i take it that 24th september has been agreed.i will confirm and get the pog set up for the rooms.

Bryan

[admin]

Re: LG washer

Hi

Bearing are a diddle..front comes off.bearings and seal can be matched.

Bryan

[admin]

Re: Rosieres Fridge Freezer overcooling

Hi Colin

34118109 RBCA320VZ
0244 (31/10/2002) 0417 (21/04/2004)
BUILT-IN REFRIGERATORS
FRIDGE / FREEZER
FROM 251 TO 300 LT.
Colour WHITE
Brand ROSIERES
Market EUROPA
This is the unit you have which also has a sensor which is available as a spare part. wither its the board or sensor ?? get both and work form there.was it working before the bulb blew?.

part numbers are
board 91601162 Approx £60
sensor 92744416 foamed in but available approx £28

Bryan 😆

[admin]

Re: WHIRLPOOL GEARBOX

Hi

Ive got a refurbished whirlpool top loader sitting here.

could even deliver this weekend as i’m in lyenham on saturday sunday.

bryan

[admin]

Re: fagor LFU 65 IT flooded now wont work

Hi

there is a mod for this which is a s/s insert which stops the sump hose from leaking.normally due to dirty paddles causing back pressure.

Bryan

[admin]

Re: September meeting

So..

Can I take it that everyone will be happy’ish with saturday 24th september ?

If so i can start getting it sorted .

Bryan

[admin]

Re: September 2011 UKW engineers meeting / AGM

So..

Can I take it that everyone will be happy’ish with saturday 24th september ?

If so i can start getting it sorted .

It would be good if we had a good engineer turn out for the AGM also.

Bryan

[admin]

Re: Whirlpool ADG 7540 – Rattling Noise From Below

Thanks for the response.

So the clips on it are “use once clips” and to get them off I just have to break them? And then fit new ones to when I put it back together?

[Author]

Posts