Forum Replies Created
-
Posts
-
Re: samsung rs21 fridge temperature
Self diagnostics are normally pretty reliable. It’s what they can’t detect that causes problems. But what they can’t detect is easily diagnosed with a multimeter/quote]
Not quite right on the samsung models..The sensor reading with a multi tester or anything else id a waste of time as they don’t give continued constant readings.Also the correct readings are only available if tested at a continued constant ambient temperature.
The defrost sensor is changed at all points where there is a defrost fault full stop..
Bryan
Re: samsung RT62KASW freezing fridge
Hi
The only way this will be freezing the fridge is either the flap is staying open or that the vents are blocked.the temp settings should be middle settings for both.
Bryan
Re: Samsung the new network
ooohh I wanted to bring this up a few weeks ago but its been burning in my pocket like a bundle of £50 notes…There has only been a handful of the new contracts out there and Samsung are trying to keep those details under wraps..
It’s also RUMOURED.that a very senior service person who is above carl nicklin made a statement at one of the last conferences of the following ::
We want Samsung to be no.1 BUT necessarily the best..Maybe they could work on getting their appliances to last and work correctly before trying to master a market they cant make an appliance correctly yet..
Bryan
Re: Help needed samsung rs20ccsv
Hi
The defrost sensor will be a failure in the freezer section..It will fail again and stop freezing.
Bryan
Re: URGENT HELP NEEDED: Samsung rs20ccsv
Hi
Give Jeff a call on0161 969 8225, 0161 969 8225 and he will be able to sort it for you.
Bryan
Re: Whirlpool ADG 7540 – Rattling Noise From Below
Cheers, so just break them off and replace when re-fitting?
Re: Whirlpool ADG 7540 – Rattling Noise From Below
stuckinstandby wrote:So the clips on it are “use once clips” and to get them off I just have to break them? And then fit new ones to when I put it back together?
Just wondering if anyone has any thoughts about getting the existing “clips” off? 😕
Re: September meeting
OK
September 2011 is confirmed for the 24th which is a saturday.room web page will be done in the next few weeks.
As for the FEB 2012 meeting I have provisionally booked the 24th February also.
Can I make a suggestion that we allow Ian dales to contact the companies as he has already been getting them together and liaise with us to confirm which companies are attending and any suggestions for companies are passed over to Ian to arrange with.
Bryan
Re: More Consumer Woes
Hi
As Mod’s we don’t read all the posts as we all have business’s to run as well.So children…when its a bit of banter just treat it as such and don’t take everything to heart..So lets hear no more about it..all posts have been edited.
Bryan
Re: american fridge freezer / fridge not cooling HELLLPPPPPP
Hi
Turn off the fridge freezer and open the doors to allow it to defrost for 48 hours. When you turn it back on it should work ok and be back to normal in 2 to 4 hours.[quote:233g1nv3]
If this is in the fridge section then the problem WILL come back as you would most likely have had a block of ice on the back left wall about 1/3 of the way up.
E-mail me samsung@ffrservices.co.uk and i can supply the mod kit for this.
Bryan
Re: Landlords need work done in RG & GU land
you know im always on the lookout Martin so anything you want to pass my way would be greatfully accepted 😀
Re: Young engineers discuss fridge problem?
Well it cant be a SAMSUNG co’s the doors are still on and the kitchen is still in one piece..
Bryan
