admin

Forum Replies Created

Viewing 15 posts - 2,866 through 2,880 (of 12,518 total)
  • Author
    Posts
  • in reply to: Bosch WTE84107gb/02 (fd8602) #351588
    admin
    Keymaster

    Re: Bosch WTE84107gb/02 (fd8602)

    Many thanks
    I ill give this a try

    in reply to: Bosch bearing job in under 18 minutes! Pretty good. #351581
    admin
    Keymaster

    Re: Bosch bearing job in under 18 minutes! Pretty good.

    i had a customer last year that did a very simple pump unblock ,on a bosch wm, spilt water from the hose he undone on to the motor plug to the pump did not realise put it back on again ,machine went bang…! wife called me out ….he had blown up pcb….end result was a new machine. look how much he saved ? :rolls:

    did not see any water in that machine….and the bearings did not need replaceing ?

    i did a john lewis electrolux last week and took 1hr 20.
    but i did have a cup of tea half way.. 😀

    canufixit

    in reply to: Siemans oven E15 fault code #351606
    admin
    Keymaster

    Re: Siemans oven E15 fault code

    the oven was switched off over night and never cleared the error code, i knew about the too hot part just not sure why it wouldnt clear 🙁

    in reply to: Bosch WTE84107gb/02 (fd8602) #351586
    admin
    Keymaster

    Re: Bosch WTE84107gb/02 (fd8602)

    thanks mike, the door filter has been washed under the tap, i was thinking poss ntc, but wasnt sure which one would control the light

    in reply to: bosch dishwasher sgv46m43gb/01 #351353
    admin
    Keymaster

    Re: bosch dishwasher sgv46m43gb/01

    yep….it will be the water wheel….
    replace and all will be good,

    canufixit

    in reply to: One for the Gorenje experts…. #351239
    admin
    Keymaster

    Re: One for the Gorenje experts….

    Hi

    The Gorenje machine is for the price very good value for money.They all have a 2 yr warranty and we dont change the bearings very often .

    Bryan

    in reply to: RS21DLMR XEU evaporator cover #351177
    admin
    Keymaster

    Re: RS21DLMR XEU evaporator cover

    Hi Kez

    I have the latest ones in stock samsung@ffrservices.co.uk

    Bryan

    in reply to: FRBB36AF20/2 #351070
    admin
    Keymaster

    Re: FRBB36AF20/2

    Have you got the service number ?

    Bryan

    in reply to: Samsubng RS21 water tank cracked #351073
    admin
    Keymaster

    Re: Samsubng RS21 water tank cracked

    Hi

    will require the evap cover,sensor and possibly the heater as well as the water tank.

    Bryan

    in reply to: FRBB36AF20/2 #351068
    admin
    Keymaster

    Re: FRBB36AF20/2

    Hi

    Isnt there a heater near the valve ?

    in reply to: Samsung RS21FCSV American Fridge/freezer #351067
    admin
    Keymaster

    Re: Samsung RS21FCSV American Fridge/freezer

    Hi

    The fault lies with the ice maker which you will need to replace.

    E-mail me with your address and i will return a cost plus postage.

    samsung@ffrservices.co.uk

    Bryan

    in reply to: beko AP930X #351063
    admin
    Keymaster

    Re: beko AP930X

    Hi

    Is the freezer fan running correctly?

    Also are the drawers in the correct position as some models have a drawer that allows air direct to the drawer compartment and if its out of position it will cause freezing of the base of the fridge.

    Also there is normally a channel that ducts the air from the top air inlet down to the bottom and the vent could be either worn or allowing airto go through.

    Bryan

    in reply to: lg WM-1080FHD washer bearings #351046
    admin
    Keymaster

    Re: lg WM-1080FHD washer bearings

    Hi..

    BUT beware…If it has taken out the tank it may require a new direct drive stator and drive which will make it BER. as the old stators don’t fit the new tanks.

    Bryan

    in reply to: CANDY GRAND OVERFLOWING FROM SOAP DISPENSER #350796
    admin
    Keymaster

    Re: CANDY GRAND OVERFLOWING FROM SOAP DISPENSER

    Hi

    Normal problem with lots of manufacturers where the scale has built up over the months and it only runs out during its final rinse.

    If cleaning the dispenser inside top doesn’t work then new dispenser is the repair..if under warranty then the dispenser is automatically changed and it cures the problem.

    Bryan

    in reply to: Bernstein Group PLC #350997
    admin
    Keymaster

    Re: Bernstein Group PLC

    Hi Tim

    Its a BRANDT machine,Not sure what the equivalent model is though.

    Bryan

Viewing 15 posts - 2,866 through 2,880 (of 12,518 total)