Forum Replies Created
-
Posts
-
i spoke to a Hoover engineer here in Reading last week and he said he has never been so busy mainly due to the fact they are contracting out less work and keeping it all in house.
Re: simple washing machine
amica awct10L………OR AWCT12L…….IVE PUT THESES IN FOR THE OLDER PERSON ,and had no come back….+thay have 2yr gtee
canufixitRe: 3 uf Capacitor
have a look at the back of virtually every fridge freezer..they all have them for the compressors…take one off an old F/F
bryan
Re: Baumatic Cooker – Steam & Condensation Problem
Think your missing point, engineer is saying there is nothing on his van he can fit that will make a difference, he isnt responsible for design or selling the customer the appliance….whilest its not desirable to have condensation forming on the cooler oven doors it is within spec…..and totally fit for purpose…that oven was designed with a selling price in mind…cavities are far better sealed and insulated that they ever were because of energy ratings….in t end you get what you pay for!!!
Re: Who’s Liable
Another work provider seems to be putting the squeeze on at the moment,a lot not happy with the working practices.
Bryan
Re: Worst Week Ever
up until Wednesday i was feeling lucky as all my engineers were booked and the phones seemed quite busy but yesterday and today have been terrible .. not happy 😥 😥
Re: Fisher & Paykel – Fault code 56 – GW611 Excellence m
Thanks mate,
well I pulled of the rotor ferrite and low and behold there was issue #1, a nice big crack traversing from the bridged terminals to about 13mm short of the centre:
I then had the bright spark idea of doing a continuity test on the RPS itself, there was very intermittent continuity while testing all the terminals – importantly the values changed on my DMM but no buzzer and after about 1 sec the value would return to 1…
So I have the new stator now (old part# 426454 and new part #426454P) but also found that the RPS wont fit to the new stator…
Apparently Fisher and Paykel doesn’t make the original stator any more, would that be right?
We sell Oust, it works on both washing machines and dishwashers, it obvously works as customers keep back for more,
for connections customers the code is : TLS6052.we use service and stocknet a system built by Eurorealm who used to write the old washvac system, excelent sytem, i cant recomend it enough, also if you need it do do something that is not part of the standard package they can usually add it on for you.
Re: Compressor replaced but still have problems. Opinions pl
Hi
Its possible that the engineer was’nt qualified or comfortable with working with R600a.
Changing from any electronic to standard stat in my opinion is a no no.raising the ne capillary fixing higher would make it run colder if its away from the evaperator.if he’s screwed it into the evaperator he has been lucky not to have punctured it which would make it un repairable.
bryan
Re: Compressor replaced but still have problems. Opinions pl
Hi
R600a compressors at the moment are cheaper than R134a compressors.
r600a is more effecient than R134a and also cleaner and less supseptible to restrictions.
Bryan
Re: September 2009
Hi All
Sorry I havent been on for a while but with the wedding ect it’s taken up all my time.
I can confirm that the Hilton coventry has been booked and confirmed for the 25 september 2009.
room rates are the same £65 per room B&B,I will be posting a link to allow booking on line in the next couple of days,hopefully this will also allow us to see who has also booked a room.
Bryan
Re: Diplomat APM8522 washing machine
if you give me your email address ill send you a wireing diagram
Simon
Re: Frigidaire FSD 28 772 SEK219 Spin Dryer
Hi Mike,
Frigidaire parts are available from Independent Service DA Ltd. spares@isdal.co.uk
Richard
