[admin]

Re: Zanussi FL1016

Martin

Many thanks for that, any idea of what and how much they are

Cheers again

Nick

[admin]

Hello,

I’m in Australia just moved from UK and the very same thing has happened to mine. It works for about 2mins then switches off then won’t start again unless you keep the start button depressed. Any ideas would be welcome.

[admin]

Re: Blomberg Freezer ? thermostat stuck

THanks to both of you for all your help.
Anyone want a freezer with stuck thermostat?!

I get the feeling that maybe I should look around for a replacement…this one is chewing all my electricity!

On a serious note though, i shall get in touch my electrician friend and ask him to take a look. After showing him all the help you have given……will keep you posted
Regards
Roda

[admin]

Re: Samsung RCS1DCSV

Hello again

I can’t find a Vacation button – where is it? It’s not on the control panel.

I live near Brackley.

[admin]

Re: Blomberg Freezer ? thermostat stuck

Thanks for that prompt reply!
i shall look forward to hearing from Dave in the morning

One stupid question though….do i have to replace the thermostat or would it be fixable?

Regards
Roda

PS just looked this freezer up on the net and it is a G rating!!!……….thats bad……..really bad…..

[admin]

Re: Blomberg Freezer ? thermostat stuck

Hi dave

Sorry i forgot to mention that it is frost free – five drawers.
I have just removed the sticker from the bottom inside of the freezer….it says: model CUFN 200 class no 9609701b0
gross capacity 0.185..(?!) net capacity volume 1 146
freezing capacity kg/24h 12

Hope this is of some help!!

Roda

[admin]

Re: Samsung SR-S20

Hi Mick,
The engineer more or less confirmed what Dave and wierdjam thought, at times when the fridge is working harder , e.g. especially hot weather or a sudden full load of food, the defrost function doesn’t totally defrost but leaves a little ice behind , over a period of months this can build up and cause the problem that I’m getting. He couldn’t remove the inside rear panel of the fridge because the ice build up behind it was too great , he could peer down behind it and said it was 1 1/2″ – 2″ thick.He suggested running down the food in the fridge and turning it off for maybe 48 hrs and then trying again , if that cures it he’ll send me an invoice for his time if not he’ll come back and have another look.
I’ll let you know how I get on.

Best,
Ron

[admin]

Re: Can you beat this?

As i reached over an appliance I split my trousers, possibly due to weak cotton 😛 , however whilst I sat in the front room reading the paper my customer repaired my trousers on her sowing machine, fair swop, one washer for a stich in time……

Kevin

[admin]

Re: Popes car for sale

sorry r600a….no one would bid for a volvo that once had a dyson in the back…it would be double the price wouldn’t it? 😈

Kevin

[admin]

Re: Comet Service Centres

excuse me not knowing….but don’t Comet buy out the guarantee?

We did not repair whirlpool comet sales under guarantee, unless they screwed it up!

Kevin

[admin]

Re: Indesit WIE137S Error Code “-c0n” HELP!!!!

If your machine is under a year old get Indesit out rewriting the eeprom normal cures this i’ve come across it a few times.

[admin]

We have a white Asko Model d1706 and we are looking to replace the front panel with stainless steel. Any idea of where to go to get this panel? Ken

[admin]

Re: Homark gas control knobs

hob model 02-710124

Ta,
Pete.

[admin]

Re: Indesit WE14 – Not automatically rinsing/spinning/draini

Thanks for the speedy reply. I have done the checks as suggested by the machine’s manual, but to no avail.

The load we had on at the time of writing my original post was set to manually rinse, but as soon as it completed its final spin, it resumed the initial wash cycle and wouldn’t stop! There are definitely no ‘F’ error codes on the display, but I wouldn’t be at all surprised if the power cut has screwed up the machine.

I am really peeved about this. To fill you in a little more, the power cut is the latest in a long line we’ve suffered, and is actually due to a fault with the electrics in the property which the landlords/letting agency are not being very prompt to investigate. So thanks to somebody bodging the electrics here I am stuck with the choice of paying to a machine that isn’t mine, or forking out for my own one! And I thought renting would avoid headaches like this 🙁

Incidentally, I checked repairs@ and couldn’t find any Indesit specialists for my postcode area (Waterlooville, Hampshire, PO8).

[admin]

Re: “New” Coverplan

just a little update. in the last few months since this kicked off we have had 3 calls, hardly worth all the fuss.

Kevin

[Author]

Posts