Forum Replies Created
-
AuthorPosts
-
admin
KeymasterRe: Indesit WIE137S Error Code “-c0n” HELP!!!!
Thanks Penquin 45, I’ll keep my eyes peeled to see if anyone can come up with an answer in the future lol
In the meantime, I’ll use it & see if anything else comes up 😆
Thanks again!!!admin
KeymasterRe: Hotpoint condenser Dryer Ultima TDC60
If the fuse is okay the door sw is usualy reliable i would hazrd a guess it is the selector sw i’ve had one or two go giving this fault it could also be dryness module which is rare though.
admin
KeymasterGraeme
thanl you
I received it …….. but there is nothing in the attachment ..its empty ?!Tayeh
admin
KeymasterDave
if you do that you will be an angle 🙂
and i will wash your clothes for 1 week 😉Tayeh
admin
KeymasterRe: Samsung RCS1DCSV
Hi Weirdjam
Thanks for the reply. I found all the docs including guarantee card, which has no details filled in, but does say it’s covered by Samsung for 2 years.
I rang Samsung who said that because I bought from Comet I would have to contact them, as they buy out the warranties. I rang Comet who said they do cover Samsung warranties but only for one year. I rang Samsung again who said – Hard Luck (or words to that effect) Impressive service eh?I then spoke to Trading Standards who say they think I have a good case to get Samsung or Comet to get the fault fixed, because on Comet’s receipt it states that they cover the manufacturer’s warranty. I haven’t written yet, but will be doing so.
In the meantime, I’ve defrosted the machine, and it’s going ok at the moment. I have never defrosted it myself before, assuming that it self-defrosts – is that correct?
How can I get the lever fixed?
admin
KeymasterRe: Indesit evolution 1600 error code f_07
Thanks for very quick reply! – the model number is WE16 UK ( thats whats on the bar code)
admin
KeymasterRe: ariston – dryer – error F10
thanks, but i’m from poland, and think you doh’t have any from poland
admin
KeymasterRe: Samsung SR-S20
On your model I imagine it is over icing around the accululator (part of the refrigerant system) thus causing the fan to stop or run very sparidically, easiest cure is to whack it on vacation if it has one for 24hrs, this turns off the fridge side but leaves freezer runnning, This will defrost the ice build up. Turn it on and see how you get on.
Could have been caused by power shortage/spike
If it re occurs you will need an engineer.admin
KeymasterRe: Ariston LI62 – door not closing
We had exactly the same problem and thanks to this web page ordered the locking mechanism part as quoted above and all now working perfectly thank you! You saved us a fortune!
admin
KeymasterRe: Freezer Wobbly !!
Dave, has anyone ever told you that you are a living legend ?
THANKYOU SO MUCH for all your help and advice, it is very appreciated.
I will visit the link you sent me and get something sorted sooner rather than later.
Enjoy the rest of your weekend 😀
Sarah
admin
KeymasterRe: Freezer Wobbly !!
How long do you recommend I leave it on fastfreeze in any one time period ?
And how long do I switch it back to ‘normal’ for, obviously keeping the door closed as I dont want unfrozen food 😀
admin
KeymasterRe: Freezer Wobbly !!
Thanks Dave, I like the sound of it not being too costly 😀
Can you give me any idea on a rough cost just so that I am slightly prepared, I would be very greatful.
Postcode is S81, Worksop, Notts.
Thanks again,
Sarah
admin
KeymasterRe: Freezer Wobbly !!
Hi Dave, thanks for replying considering its bank holiday weekend. Just been to check and the temperature is -22.
The rocker switch is still on ‘s’.admin
KeymasterRe: Diplomat 8702 Washer Dryer
Did you ever get the manual? I had the same problem and I cannot work out how to use the dryer function…so I contacted MFI and they were supposed to send me the manual. A month later I am still waiting. I really need to use the dryer!! Anyone help?
admin
KeymasterRe: Thermostat failing on my Nardi fridge freezer
Hi Dave,
There’s some kind of serial number (in ink) on the top: A13 0307 B515 000. Nothing engraved except voltage markings.
I’ve also taken a closer look at where the other end of the capiliary goes: it looks like it’s plumbed directly into the end of the cooling pipe in the freezer. Is this something that I can plug the unit you suggested into? It looks like a permanent fixture to me.
Cheers,
Trevor -
AuthorPosts
