[admin]

Re: Baumatic OSF60OVEn – No power to oven and grill

Hi

We can supply the parts if required

Bryan. Service@ffrservices.co.uk

[admin]

Re: 1937 GE flat top help needed

Hi Karl

Yes that should do it

Bryan

[admin]

Re: 1937 GE flat top help needed

Hi Karl

Then a VX0 will NOT work with your fridge.

You need a stat that operates a fridge with a ice box and normally come with a push button for defrosting.

Bryan

[admin]

Re: 1937 GE flat top help needed

Hi Karl

Does it have a icebox that makes ice cubes ?

Bryan

[admin]

Re: 1937 GE flat top help needed

Hi Karl

You will need a thermostat suitable for a icebox fridge as if you fit a vx0 it will totally defrost that plate thus not allowing ice to be made

[admin]

Re: Admiral/Maytag Keeps tripping out, our home circuit boar

Hi

How often does it trip ?
Have you tried checking the defrost heater ?

Bryan

[admin]

Re: Samsung RS60DJSM S/N 238042BL800053R American side by si

Hi Alan

You still need to check if the heater/fuse/sensor ext have failed just search connect for rs21 and it’ll bring up all the parts and pictures

Bryan

[admin]

Re: Samsung RS60DJSM S/N 238042BL800053R American side by si

Hi

Same as RS21 faults. just take the heater off the old evaperator and put it onto a new standard RS21 cover.

Bryan

[admin]

Re: 1937 GE flat top help needed

Hi

Dependent on the fixings it may not be a standard swap over of the stat as some older refrigeration the fittings are different.

Also it looks like you have a ice box in the centre and if the phile fastens onto that then its not a vt9 or vx0 it’ll need a ice box stat which is whirlpool kit 2 if I remember correctly.

Bryan

[admin]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi

Ask him to take a sample of oil onto a kitchen roll. If its not clear then the appliance will be scrap..I always tip the oil out of the old compressor as a standing now..especially samsung RSH1..It is also a known fault as there was a technical bulletin concerning it.

Bryan

[admin]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi

More likely that the compressor oil has turned acid (common fault when the compressor fails on the RSH1 ) This in turn burns the new compressor out,If it fails again then this will be the most likely cause.which will make it scrap.

Bryan

[admin]

Repairing an Arrow oven?

Hi JC

Can you e mail a couple of photos as I still have all the elements in stock

Bryan service@ffrservices.co.uk

[admin]

Re: F&P dd605fdh

Thanks Grendal

[admin]

Re: replacing a zanussi door gasket time 🙂

washing machine ones never a problem, washer dryer ones.. i give them to the other engineers to do 🙂

[admin]

Re: GE 1937 flat top fridge stopped cooling.

Hi Karl

If your prepared to bring it or meet at some point with it then I can have a look,The last one I repaired was a 1945 fridgidaire which is still working after a few years.

Bryan

[Author]

Posts