Forum Replies Created
-
Posts
-
Re: Maytag GZ2626GEKB Fridge/Freezer Water not shutting off
Hi
Check the micro switch by the water dispenser for damp or sticking. Shut off will be behind the f/f or in the cupboard near it hopefully
Re: GEMM Commercial refrigeration
http://www.gemm-srl.com/en/index.html
Getting spares from foriegn manufacturers are easier now direct.
Bryan
Re: Safe contractor scheme
Andy jones wrote:Just an update, told the agent I wasn’t prepared to join the scheme and 2 months past the deadline they still call me out for jobs, when I asked if this was going to be a problem there was no comment, can only assume everyone has said the same oh well that £150 saved 🙂
did the same with a company that asked me to join , I said no.
and 4 months on they still call me, so you don’t need to keep joining schemes ,canufixit
Re: NewWorld NW90G – Grill keeps going out.
I haven’t touched any gas other than the bayonet fitting to remove the oven. If I get to the point I need to, I will assess if it’s cheaper to buy a new oven
RANT !! if you can’t be bothered to spend the money or time to gain the experience then don’t touch the appliance.. RANT over !!
If YOU disconnect the bayonet then YOU must be gas safe registered..And yes some of us do think its worth while spending the money to be qualified.. Training may be a loss for engineers but at the end of the day its worth it.
Bryan
Re: LG F1256QD drum paddles
1. If one paddle breaks buy two spares as they are cheaper than your time, and leave room for error (and the tabs breaking again)
2. The paddle is assymetric, so offer it up to the drum and establish which end needs to be at the front of the drum, by matching the paddle tabs with the drum holes. Mark the front of the paddle with an ‘X’ using a DVD or laundry pen, to avoid a slip-up.
3. Using a pair of side cutters, cut off 1/2 the tab, at the end furthest away from the the ‘X’ (ie furthest away from the front of the drum). This part of the tab (on my spares at least) is tapered – this being the bit you cut off.
4. There are three metal tabs in the drum which prevent the paddle from slipping out of the tabs once in place. Ensure these are all prised up at least 1/8″ so they grip the paddle and prevent it sliding out.
5. Slot your paddle in, and ensure that it can’t slide off. (If it does repeat step 4).
6. Simples – if you know how!Re: Samsung RS55XKGNS problems – (same internals as RS21)
Hi Barry
Have you tested the defrost heater ? also remember that you must disconnect the drain heater else you will get false readings
Bryan
Re: Samsung Fridge Freezer – water & ice dispenser not worki
Hi
If your water isn’t coming out cold .. how cold do you expect it to be ? have you tried dispensing a cup of water first then dispensing more ?
Bryan
Re: ProAction spares
It’s a argos special made by vestal, We can supply if needed.
Re: USED PLASTIC FRIDGE PARTS
Just dumped about 300 door trims,fridge shelves and drawer fronts got another load to get rid of also.
Bryan
Re: Smeg UKC325XNF: Freezer alarm going off
Hi Hazel
We cover your area for repairs.
