Forum Replies Created
-
Posts
-
Re: LG WM-1460F(H)D
Hi Dave
It was the right one which was replaced.It starts filling once the programme has been selected and the start button has been pressed, after that it just won’t stop.
Regards
DSWRe: REMOVAL OF TOPIC
JP this is the wr
you can tell it like it isWhy stop at silly twat…………………
post counting, I bet you count the snow poles on the a66
for those stuck in wales..a high up road that cross’s a hump in the middle of the lamd.
opps i am begining to slip into martinese
merry xmas do
ted
Re: whirlpool AWM8143GB
hi
I am at home now , will consult the tech data in the morning and reply soonest
ted
Re: LG WM-1460F(H)D
Just an observation I’ve made. Of the cold water inlet valves the right one (looking from the front of the machine) is the one which takes most of the water. The left one seems to be used mainly on the final rinse. The right one will not stop taking water, the only way to stop it is to disconnect it. But the left one when it is used on the final rinse does stop on it’s own. I’m not sure what this tells me?
I’ve tried switching the cables over from valve to valve but it makes no difference. Any ideas?
One thing which I haven’t mentioned is that the machine did recently have a faulty coil which was replaced. Could this have any bearing on my current problem?He never really spoke to me. But hes either being fishing or possibly another members had taken the huff with him?
He has no allegencies to any manufacturers or so he said so wheres the presure coming from?
Suppose I better stop counting my posts ! Silly twat
Re: Christmas Bash!
Family hotel where they have child minders?
no not jason…. dont want to scare em to sleep
ted
Re: whirlpool AWM8143GB
FH is a failure of one or more of the following
water tap
inlet valve
flowmeter
Pressostatcheck water tap is not an easy install one that punctures the pipe with a small hole…it can fur up
inlet valve soleniods do seize during use
flowmeter running slow practically un detectable to the eye but not to the pcb
pressostat u seem to have covered
finally the electronics try the others first
ted
Re: REMOVAL OF TOPIC
I agree with your sentiment and understand your feelings but i also think we are bigger than martian and can survive with his dirty washing in public.
Martian has returned to cyberspace and long may he stay there.ted
Re: Electrue/NESN
If an engineer is in the field out of hours or weekends, surely the office has to be open to support him?
An extra £5.00 does not cover this cost
tedRe: LG WM-1460F(H)D
Hello Bob. It does give an error code FE when the machine is too full but it won’t stop filling. I have cleaned the pressure chamber out and checked for any blockages in the tube. I was kind of narrowing it down to either the pressure switch or some fault with the main board. I wouldn’t know how to test if the switch was indeed faulty?
I have tried getting hold of a replacement switch without much luck. Would you know where I could get one from? I’ve spoken to LG and to be honest they weren’t much help. As you probably know all there parts are supplied by Seme and I’d already spoken to them. They didn’t even have a pressure switch listed on their system so they have sent an ‘enquiry’ out which could take up to three days. Any suggestions would be much appreciated.
Re: Sean In The War Room
welcome in sean
hope you enjoy yourself without the restrictions the normal forums place on you.
ted
