[allan73]

Re: Di 620uk not selecting programme

Thanks.

[allan73]

Re: Electrolux ESL4114 prod no 911741029/01 dishwasher

Will do thanks Martin
Allan

[allan73]

Re: Hotpoint CTD00 front drum support wheels

Thanks Iadom,It looks like the drum has been wearing on the support housing for the pads. I hope it will be ok.
Allan

[allan73]

Re: Bosh WAS32462 E57

Thanks Steve, I’ll price up an interlock.
Allan

[allan73]

Re: Zanussi ZWF14070W1 been transported now error code

Thanks Martin, I did think the problem lay with the pressure system. As you say I suspect the machine has been lied flat.
I was hoping there could be a reset procedure as with the Indesit made stuff with the similar pressure switch, but maybe changing the switch is the answer now.
Allan

[allan73]

Re: Candy GO482/2 heater fault ?

No not yet but I was under the impression that they break down under load and can read fine when cold.

Allan

[allan73]

Re: Whirlpool ADG450 no fill

Any one ?

[allan73]

Re: Question for the Bosh experts

Will do,thanks Martin.

[allan73]

Re: Bosh WVD 24460GB/03

Will do, Thanks Martin.
Allan

[allan73]

Re: Hpt SDW60 prewash light flash

Thanks.

[allan73]

Re: Hpt SDW60 prewash light flash

Thanks Martin, do you know if the Ntc comes with the pcb ?
Allan

[allan73]

Re: WMD940 F01

Yes was a 3 phase motor. I’ve scraped it now but still feel the module was at fault. I’m going to try the motor on another m/c tomorrow and see if it works ok.
Allan.

[allan73]

Re: Hpt SDW60 prewash light flash

Anyone ?

[allan73]

Re: WMD940 F01

Can anyone help ? I’m really scratching my head on this one.
Allan

[allan73]

Re: Bosh WAP28360GB/01 bearing job

I will advise the lady to speak to bosh.
Shame though as looked like a decent job, not too badly gone and in a garage with lots of room to work.
Allan

[Author]

Posts