Allsorts

Forum Replies Created

Viewing 15 posts - 616 through 630 (of 1,356 total)
  • Author
    Posts
  • in reply to: Rejected Claims #368900
    Allsorts
    Participant

    Re: Rejected Claims

    Don’t just stick by the 6 years rule if you are going ahead with it…

    PPI is the same 6 years however I just took 3 PPI cases ranging upto 10 years old and won. the 6 year rule is a guidence so I am lead to believe… If you have docs that go up to 6 years but then have more that carry on the range,, present them too.

    in reply to: Has anyone actually bought T111 exemption for refurbishing? #357286
    Allsorts
    Participant

    Re: Has anyone actually bought T111 exemption for refurbishi

    Article response at the bottom of this page might interest you.

    http://www.techweekeurope.co.uk/comment/why-we-are-pissed-off-with-weee-21133

    in reply to: Stand Well Clear #368424
    Allsorts
    Participant

    Re: Stand Well Clear

    Do they even have telly out there?

    in reply to: Stand Well Clear #368421
    Allsorts
    Participant

    Re: Stand Well Clear

    Yeah.. All those good parts gone to waste..

    Notwithstanding that, the guy should be prosecuted.. what he has in that drum are fluorescent tubes.. hazardous waste… not supposed to smash them. The contents are a carcinogen.

    in reply to: Amica AWM612D. E32. #368300
    Allsorts
    Participant

    Re: Amica AWM612D. E32.

    At what stage of the wash is it showing the error code?

    in reply to: Bosch SRS43C22GB/04 – Check Water light #366122
    Allsorts
    Participant

    Re: Bosch SRS43C22GB/04 – Check Water light

    This might sound stupid.. but are you sure the water supply valve is working … that there is actually water getting to the inlet valve.

    in reply to: Zanussi ZWD 16270 Washer Dryer #368027
    Allsorts
    Participant

    Re: Zanussi ZWD 16270 Washer Dryer

    Sounds like you have a problem with the ‘Main module’ or the power to it.

    It would be very difficult to assess this problem without testing the machine parts.

    in reply to: connect: cost of parts to publc #367993
    Allsorts
    Participant

    Re: connect: cost of parts to publc

    One example:

    Qualtex offer 062057004 at £19.58 + vat … a lot better than Connect
    Qualtex also do a pattern version of that element at only £4.79 + vat.

    George

    in reply to: WMA drum supports not threaded #367939
    Allsorts
    Participant

    Re: WMA drum supports not threaded

    Yup .. mine too… I have never had one that was not threaded and would have sent it back if I got one in that condition..
    That’s why I asked if it was an original or a spurious one.

    George

    in reply to: WMA drum supports not threaded #367937
    Allsorts
    Participant

    Re: WMA drum supports not threaded

    Were they originals Jim?

    George

    in reply to: comet #351706
    Allsorts
    Participant

    Re: comet

    I know this is slightly off track but I’ve just been told by someone that he has been doing some agency work driving trucks from Comet into Sims at Widnes / Ellesmere Port full of doorstep collected appliances..

    in reply to: Servis 108 Twintub #367636
    Allsorts
    Participant

    Re: Servis 108 Twintub

    Needing the motor part numbers for this machine.

    George

    in reply to: Whirlpool pump? #367591
    Allsorts
    Participant

    Re: Whirlpool pump?

    It might have been this one Jim C00144997

    in reply to: Tricity Bendix AW1000 W Not Spinning #367573
    Allsorts
    Participant

    Re: Tricity Bendix AW1000 W Not Spinning

    A common fault with this model.. Sometimes the machine will spin but not reach full spin speed, is another fault for this machine… It will proberbly be the timer

    in reply to: Whirlpool pump? #367588
    Allsorts
    Participant

    Re: Whirlpool pump?

    These are the two part numbers I’m getting Jim.

    480111101014
    481236018559

    George

Viewing 15 posts - 616 through 630 (of 1,356 total)