Forum Replies Created
-
Posts
-
Re: Help please Hotpoint twin tub spigot kit
Still got a brand new spigot and nut going spare………
Cheers Martin 😉Re: Help please Hotpoint twin tub spigot kit
Hi Allan,
what is it that you want specifically? I’ve got what I think is a brand new spigot and a spigot nut(connect nut923)Dave
Re: Servis Quartz Pressure Vessel Hose from where?
What about one from an early Hoover Logic or Electron?
Re: Servis Quartz Pressure Vessel Hose from where?
Try HSE3667 from Connect. £3.58 for 210cm length.
Dave
Re: tricity old oven stat
Have you got a Diamond H equivalent? I’ve got a load of old Tricity thermostats, but no TA508.
Dave
Re: AEG Washer Lavamat 72600
Sounds like you’ve got an inadvertently activated demo mode – possibly! It is selected by holding the PREWASH and SOAK buttons at the same time while switching the machine on at the rotary dial and moving it to DELICATE SPIN. Buttons need to be held for more than 4 seconds. It is deactivated by doing the same procedure again. It happened to me once, and was pulling my hair out until I discovered this gem. Hope this helps.
Dave
Re: Whirlpool Dishwasher ADG 7540/1 Strange fault
This sounds like a low water level problem to me. I’ve got a brand new pcb by the way, part no 481221838174 which I fitted to a machine, but it did not fix the the snag, so I removed it and there it has sat on my shelf for the past 2 years. When I put that part no into connections, it comes back with 481221838381, so it should be the right one. Going cheap. 😀 PM me if interested.
Dave
Re: Miele W698 no door release and no fill, etc.
Check the main pcb behind the machine front for dry joints.
Dave
Re: DIPLOMAT ADP8322
If this is a Whirlpool machine, then the part no is 481236158434 and is available from Connect at £59.85 trade +vat.
Dave
Re: Diplomat washing machine module
The 546023501 is the part no. Just give EMW a call on 0115 9652118.
Dave
