Forum Replies Created
-
Posts
-
Re: Bosch SGS3042GB/03 – timer sticking
Lol I would say that dislodged limescale is a probable cause for the not cleaning problem. As for the water fill level it should come just up to the rubber door seal at the front of the m/c. A good trick to see if the spray arms are working is to tie a rubber band/ string to the one side of the arm and see if it has moved when you open the door
Re: Bosch SGS3042GB/03 – timer sticking
How much water comes into the base? And are you sure the spray arms are turning properly?
Re: diplomat double oven ABA4540
Try cutting off the old connector and crimp on a new one,if it still doesn’t work put on a new thermostat. That should solve it . Hth DJ
Re: Zanussi wjd1257w won’t drain. Help!
Yes that is perfectly possible, does the impellor of the motor turn ok or does it feel a little stiff? There is not much power in these motors and they jam easily.hth DJ
Re: Siemens D/W sticking
I know I’m probably teaching my grandaddy how to suck eggs but you mentioned on one on your earlier posts that you had trouble with the “o” rings not sealing. A good trick I use is put vaseline round them before I put it back (the same when changing heater boxes) it works s treat! Also what do you mean heat exchange?… the heater?
Re: A real case of SWAN’ upping!
Wow Martin that was impressive! 10 in a row! And I was chuffed with my pathetic attempt at two thismorning :rotfl:
Re: Bosch SGS3042GB/03 – timer sticking
Outlet pipes are correct well done 😉 nice logic cycles are anywhere between 40mins -2hrs depending on where you set the dial and what temp. You set
Re: Siemens Washing Machine WXL 120GB/01 Stopped : No Lights
Ok so first of all you need to get at the heater which I believe is at the print on these. You can either tip the machine on its back or take the front off its up to you. Then you need a multimeter to check if you have continuity through the heater or weather it us open circuit. But to be honest if the machine is completely dead I would be trying to find out the cause of this first of all 😉 check the PCB isn’t blown or damaged in any way. Hth DJ
Re: hoover optima oph714d
Hummm sounds like either a PCB fault or pressure switch,if I was a betting man I would say PCB but pressure switch is the cheapest option to try first even though it is very rare that modern ones fail hth DJ
Re: Help! Need motor for Tecnik TKD-701 dishwasher
Can you take the motor off and take a few pix? Could be the same or similar to something else.
Re: Siemens Washing Machine WXL 120GB/01 Stopped : No Lights
It’s only a theory but defo. Worth checking the element.The “click” could of come from any thing really ,motor relay ,door switch but from what you have described it doesn’t sound good 😕
Re: A real case of SWAN’ upping!
Unfortunately Martin is contractualy not allowed to share any more info. with us .So i assume he would prefer a little humor before he starts his red tape filled next job . We have all been there,called out to someone elses mess and in my experience you either laugh about it or cry….is rather laugh 😉
Re: Bosch Replacement Pump is different size
Do you still have the original pump housing? The new pump should fit on it 😐
