Forum Replies Created
-
Posts
-
Re: Teka washer/dryer
Could be anything really from too much water pressure,machine tilting forward too much or even a sock stuck up inside inlet pipe from draw to drum…. does it come out when m/c is filling or when on spin?
Re: Siemens washmachine pump cover
Sounds like something is jammed inside the pump. Turn machine onto its back , try turning it back and forth. If that doesn’t work pump off. And remove what ever is jammed inside. hth 😀
Re: Homark Double Oven – lights on but no power to ovens
Yea send me a photo , it does sound like a very old one. If you can get a few photos of the inside i could prob. work it out…… possibly lol
Re: Homark Double Oven – lights on but no power to ovens
Bypassing the clock shouldn’t compromise the safety , its only there as a timer for automated cooking etc. The safety cutouts are there for that reason.
Re: Homark Double Oven – lights on but no power to ovens
Hi mate it really does sound like the clock is set to auto. i had one last week that had me stumped , even though it was set to manual i found that i still had to set the clock by pushing and pulling the different knobs and resetting the clock… you could also just try by passing the clock all together? hth DJ
Re: Gas Safe Inspector
Sorry just re read the original post and no he can’t do that by himself, he would have to have a gas safe engineer with him.
Re: Gas Safe Inspector
Back in march I did a “fast track” gas course and I now have to complete a portfolio of work showing me working in set number and types if gas appliances (under the supervision of a gas safe engineer) so is say that gas inspector is being a bit of a jobs worth by the sounds of it…
Re: guarantee on non part repair?
do you fit genuine? or do you find they last just as long as the non-gen?(just out of curiosity)
Re: guarantee on non part repair?
Ok chaps… what about fan oven elements? i usually give six months because i have tried to complain and send them back before after just 1 month and the company i bought it from wouldn’t have it…
Re: AWP510L board blown twice !!
I did have that problem about 6 months back, fitted one board wored for a couple of days. Got called back replaced it again, ive not heard back since…. they are quite pants 😆 . Its about the only thing i change on them. The only diffrence i can see is that i didn’t have any blow marks etc. it just went dead.hth
Re: Bosch sgs46e02gb "check water" light
Well what it does is fill and fill until the anti flood kicks in the circ pump doesn’t even try to lick in… I’m a little stumped to be honest…
Re: Bosch sgs46e02gb "check water" light
because….. i suck!! lol
Do you have any other ideas on what would be causing this martin?
