bazza500

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 1,916 total)
  • Author
    Posts
  • in reply to: Beko DWD5414W dishwasher #444928
    bazza500
    Participant

    Re: Beko DWD5414W dishwasher

    Get this often. Cured it by replacing the hose after refitting ones for ages only for them to come off again.

    I think the old hose must get soft due to the heat and go out of shape as when I replaced it with a new one it was harder to get on and harder to pull off.

    in reply to: Beko WMB81445lw – No spin #444224
    bazza500
    Participant

    Re: Beko WMB81445lw – No spin

    no way to test it as you get no reading through any of the pins.

    in reply to: Beko WMB81445lw – No spin #444222
    bazza500
    Participant

    Re: Beko WMB81445lw – No spin

    Quite common for the motor to go on these.

    Symptoms include, wont run program, door locks, and unable to reset or change program.

    in reply to: Staff #444186
    bazza500
    Participant

    Re: Staff

    I’d be concerned about anyone who takes a job and within 10 weeks is asking for a pay rise.

    This is typical of someone who works out how much their work is bringing in but has no idea about business overheads. Now that this has risen it will always be on his mind and the more he gets the more he’ll want.

    in reply to: Zanussi Cooker Door hinge – 948904406-02 #443888
    bazza500
    Participant

    Re: Zanussi Cooker Door hinge – 948904406-02

    Yep that’s the part. There is no photo on Connect I can see.

    in reply to: Zanussi Cooker Door hinge – 948904406-02 #443886
    bazza500
    Participant

    Re: Zanussi Cooker Door hinge – 948904406-02

    This hinge comes as part of the outer door

    in reply to: AEG washer dryer welded drum replacement #443213
    bazza500
    Participant

    Re: AEG washer dryer welded drum replacement

    front of cabinet comes off and it’s easy from there

    in reply to: AEG Dishwasher #443193
    bazza500
    Participant

    Re: AEG Dishwasher

    Analogue pressure sensor fault

    in reply to: Zanussi dishwasher zdt12011fa #442750
    bazza500
    Participant

    Re: Zanussi dishwasher zdt12011fa

    Pressure switch mod kit required.

    The reason it cuts out is that if it doesn’t get a reading from the pressure switch telling it it is filling within 90 seconds of switching the valve on it aborts and empties.

    in reply to: Washing Machine #441832
    bazza500
    Participant

    Re: Washing Machine

    Check the motor brushes

    in reply to: AEG Electric oven – grill turning off after a while. #441697
    bazza500
    Participant

    Re: AEG Electric oven – grill turning off after a while.

    I would check the continuity of the fan motor next.

    in reply to: AEG Electric oven – grill turning off after a while. #441695
    bazza500
    Participant

    Re: AEG Electric oven – grill turning off after a while.

    What is the part number of the part you have replaced?

    in reply to: AEG Electric oven – grill turning off after a while. #441692
    bazza500
    Participant

    Re: AEG Electric oven – grill turning off after a while.

    when you say you swapped the white wires over. It looks like it has black wires to me.

    in reply to: Zanussi 6K9 1200RPM DEAD #441633
    bazza500
    Participant

    Re: Zanussi 6K9 1200RPM DEAD

    Would need model number and preferably PNC number to be able to give any advice

    in reply to: lg dryer tdc70045e 708kwhx00113 #441636
    bazza500
    Participant

    Re: lg dryer tdc70045e 708kwhx00113

    Easy, side panel off and its right in front of you.

Viewing 15 posts - 46 through 60 (of 1,916 total)