Forum Replies Created
-
AuthorPosts
-
BobHope
ParticipantRe: Whirlpool Fridge Freezer ART766/NFV 85647661500
PM me your email address and i will forward some info.
Bob.
BobHope
ParticipantRe: Beko WME7247S washer help
hi John,
just checked the fault finding flow chart for that appliance and there is nothing about a 12 error.pm me your email addy and i will forward it.
Bob.
BobHope
ParticipantRe: Hoover SE220 hose
part no. 41010982, its now changed to a grey corrigated hose.
it used to be called and anti loss pipe, but i cannot find it.
so please double check before ordering it.Bob.
BobHope
ParticipantRe: Hotpoint WMF 940 fault !
can not access the servicenet site at the moment, but im sure thats the door lock not deactivatig on time.
Bob.
BobHope
ParticipantRe: Kyoto Deluxe KU9577 Frost Free Upright Freezer
on the back of your fridge freezer is a defrost water collection tray, its full and will need a manual empty from you, just soak up the water with a sponge or towel,
the noise you hear is the water being sucked up the pipe by the pressure drop in the freezer when you close the door.Bob.
BobHope
ParticipantRe: Cannon cooker info needed
the rating plate has no mark number for 1, but has mark 2 and 3 after the model number (mark 2) (mark 3)
Bob.
BobHope
ParticipantRe: Cannon cooker info needed
pm me your email John and i will send all 3.
Bob.
EMAIL SENT.
BobHope
ParticipantRe: Cannon cooker info needed
Hi john there is 3 versions of that model MK1,2 and 3.
Bob.
BobHope
ParticipantRe: Hoover OPH147
you have a problem with the water heating or temprature sensing circuits.
mains plug out if you intend to look for yourself
Bob.
BobHope
ParticipantRe: Hoover HFA290
part number 41009539.
Bob.
BobHope
ParticipantRe: Hotpoint FFA52S adhesive drain tray heater
Hi Kez,
pm me your email address.Bob.
BobHope
ParticipantRe: VHD 9143 hoover no drum action, induction motor
if you want some info on the motor and pcb PM me your email addy and i will send some info.
Bob.
BobHope
ParticipantRe: Hotpoint FFA52S adhesive drain tray heater
the part no. for the gutter heater is C00267026, but there is a complete seperator tray mod also available but its serial no is required for the correct parts.
Bob.
BobHope
ParticipantRe: Dualit DLT2BG Unusual screw head
its called a ‘System Zero’ or’4.5mm gamebit’ tool that removes these screws.
http://www.zimbio.com/Nintendo/articles … s+snes+nes
Bob.
BobHope
ParticipantRe: Hotpoint Washer/Dryer WDD960P F13 Fault
quite common for them to block up. if you follow the pipe from the condenser fill valve to the top of the heater box it connects to it. to remove it for cleaning or replacement you need to remove the complete heater box, only 6 torx screws.
Bob.
-
AuthorPosts
