Forum Replies Created
-
Posts
-
Re: Double valve for Bendix CWD1010
its on the dryer section Jim, part number 124 08 25-00/8.
Bob.
PS. if its the dryer coil o/c the hotpoint wma coil will fit on the old valve, if my memory serves me well,
Re: howden/ lamona washer dryer
Candy/Hoover appliance with a skirt on, 22 position selector switch part number 41014503 will sort it out, common problem.
Bob.
Re: Hotpoint aqualtis aqxxl129pm uk
ok Mike,
if you want the service manual its about 1mb in size, just pm me.
Bob.
EMAIL SENT.
Re: Hotpoint aqualtis aqxxl129pm uk
hi Mike,
as it was a while since the last posts on this, if you pm me the model, comm code and an email addy i will send you some info.
Bob.
Re: Candy GODF800 – need to cancel wash cycle
press the start pause button untill it flashes, switch the selector switch to off, switch the selector switch to a drain cycle to empty any hot water, repeat above and select the correct programme, hope that makes sense.
Bob.
Re: working on gas cookers information
this subject has been a grey area for years, make it simple, gas, dual fuel, just dont do it.
Bob.
Re: BAN134NF Wiring
looks like a normal connection on the diagram, live, neutral, and black to the overload, capacitor across the ptc.
Bob.
Re: Hotpoint FFA74P
if the appliance is completly dead, check the thermal fuse block on the evaporaor first, if its just the compressor thats not running check the overload ond the winings for contiuity or power it up independently.
just few simple checks before you buy the module, there is nothing in the service manual that states this module is not configured.Bob.
Re: Maximum length of ducting?
the reason for short ducting is, if its too long the resitance along its length is more than the extract fan on the drier can handle, and also the steam will cool and turn to water before it reaches the outside air.
Bob.
Re: WTA’s Alleged 0800 Repair Involvement
i have followd both these thread’s and i think that they should be both locked for a day or two just to let the posters time to reflect, i dont see it acheiving any more than what has already been posted, but thats just my opinion.
Bob.
Re: Hotpoint Freezer FZ150G
no it does not come with instuctions, there is 2 versions of pcb on this model 1 rear mounted and the other is behind the facia. from the s/n given your is facia mounted. pm me an email addy and i will send some info.
bob.
Re: Refrigerant Recovery Machine
PM sent regards location and contact details, recovery unit only ever used for R134A recovery and complete with instuctions, heavy duty ball valved hose and piercing pliers.
Bob.
