Forum Replies Created
-
Posts
-
Re: Refrigerant Recovery Machine
well done for passing he test 😀
i have a X369 multigas recovery unit surplas to requirements.
have a look here http://www.bdbgb.com/x369-multi-gas-ref … _17_21.htm, offers invited but you must arrange collection as its heavy, also have lokring tool if you are still after one.Bob.
Re: Refrigerant Recovery Machine
do you have the correct certification for 134a recovery and disposal ?.
bob.
Re: Hotpoint Freezer FZ150G
normal smart card reader plugged into a 2007 version of the low end adaptor. 2005 version will not work.
Bob.
Re: Cannon DF Cooker 10583G Mk3 Tech info
please PM me an email addy and i will send some info.
Bob.
EMAIL sent.Re: New here . Pls help.
the thermistors were a common problem with this appliance, in your first post you stated that they were 3 ohms, that is a very low reading for a thermistor.
Bob.
Re: New here . Pls help.
before you go buying the thermistors please do check that the fridge door has not dropped and stopped activating the light switch, its often the case as this also stops the fan from running.
Bob.
Re: Samsung RS21 Forced defrost if possible?
hi Rob,
PM me an email address that will accept a 6.5mb file and i will send you some reading.Bob.
Email sent.
Re: Hotpoint FF 200 EG Fridge Freezer
its possible it has a defrost problem, you need to check the defrost circuits and heater, there is a mod for ice build up but that normaly takes longer than 2 weeks to show up problems, the ice build up blocks the air return vent just below the evaporator.
Bob.
Re: LG TDC700
hi rocker,
it not that hard to do a belt change, but if you want some info then pm me an email address that will handle a large pdf file.
Bob.
EMAIL SENT.
