Forum Replies Created
-
Posts
-
Re: rangemaster classic 100 induction electric range cooker
Hi adv,
do you have the 5 digit product code.
Bob.
Re: Fibre Optic Broadband
i wondered why its so slow up north you lot down there are are just bleeding the system LOL.
what service provider is supporting that speed as the wireless modems will be backloging at that speed.
Bob.
Re: Hoover washer 11 flashes
i would disconnect the wash heater and try it again as its a strange fault, and all the strange unrelated error i have had have been the wash heater.
Bob.
Re: Flavel 100 mixed fuel cooker
you will need to find the appliance rating plate to get the model number or better still the product code. its sometimes behind the door seal of the main oven at the bottom or if it has a pan storage draw it will be in there or it might be on the back of the appliance, report back and im sure someone will help.
Bob.
Re: DAEWOO FRSU20DAI or1?
give me an email address that accepts large files and i will send some info.
Bob.
Re: Lamona HJA8630 dishwasher
you can check the heater from the pcb connections without taking the appliance out.the heater relay is in one corner and the 2 heavy heater wires areeasy to spot.
Bob.
Re: Lamona HJA8630 dishwasher
all the 5 i have done were the pcb and the heater relay was bulged or melted, symptoms of no heat or heatng all the time depending on the heter relay welded together or open circuit.
Bob.
Re: Lamona HJA8630 dishwasher
more than likely product code 7676383842 and the info is just below this post second one down.
Bob.
Re: Lamona HJA8630 dishwasher
its the door mounted PCB, the relay melts, cheap as chips to relplace.
Bob.
Re: Creda Oven C362EK Outer door glass (Grill)
Hi Nick,
two differant door glasses fitted,
6102808 fits model ending in EK
6204220 fits model ending in EKH.bob.
Re: Hoover GO292-80 Washing machine
Hi Loopey,
how are you doing these days ?, hoover autos hate the cold and dampness allways have done, then most modern machines dothese days.
Bob.
Re: Hoover GO292-80 Washing machine
it wont work if its too cold, the software checks the ntc for correct ohms range and if its not right it will show an error code.
Bob.
