Forum Replies Created
-
Posts
-
Re: Leisure RCM10CRK Range Oven
pm me you email address and i will send some info as there is a mod for this.
bob.
Re: Samsung RS21DCNS Module?
check to see if it has had the mod done in the main pcb box as it had a fuse pcb fitted as a safety issue it could be one of them fuses gone.
Bob.
Re: Baumatic BT2760SS Base element
im sure i have posted this up before but cannot find it, open the pan storage draw, look up thats the plate that needs to dropped at the front, to do this remove the rear back panel and there will be 2 screws that hold the rear of that plate up, remove screws and drop the rear of the plate down, it will now slide back 5mm and drop off the front support ridge, remove element retaining screws and reverse procedure. hope that makes sense.
Bob.
Re: CDA CD900 1BL bottom oven
which element have you replaced ?, what settings on the oven control do you use ?, does the fan in the oven rotate.
Bob.
Re: New Zanusii Frost Free Fridge Freezer "Ticks like a Cloc
i will be the defrost timer, been to 2 of these appliances in the last week for this fault. they work ok but do sound like an old clock ticking loudly.
Bob.
Re: Hoover WMH 168D
check the heater for earth leakage as it causes this fault, or just disconnect it for quick est.
Bob.
Re: Hotpoint WML560 tripping out.
if its run ok for this long it may have had the eeprom file mod done, have you checked the moulded plugtop for insulation faults on the neutal to earth as i have had this cause the tripping on spin quite a few times.
Bob.
Re: Electrolux Oven Espirio EOC69400X
product code is 944181968 production date is 2008 so its not new.
Bob.
Re: comet…again!!!
more news.
http://www.telegraph.co.uk/finance/news … -pile.html
