[burns]

Re: AWZ5120 FAULT CODES

E17 – states
Quote.
Dryer metallic plate, connections in door or door lock :tup:

[burns]

Re: maytag fridge freezer

This model the cladding should tease off from the sides on the freezer door. Check for any securing screws underneath the door. But from memory I think the sides just teased out to release. They were made to be removed to enable access to the dispenser. Just very carefully…..

[burns]

Re: maytag fridge freezer

Hi. Drop me a line with the model number.

[burns]

Re: Gc2224gekb American

From my experience on these, the evaporator fan fails very rarely. But when it does it will take down the jazz board (pcb) mounted in the top of the fridge. You can usually see signs of melting around the coils on the fan. Change the fan motor first, if not it will soon take out the new pcb. Been there and done that….

[burns]

Re: I’M SURE LTD

One national work provider has put them on stop and asked it’s agents not to accept any direct work due to non payment.
Sky maintenance. Weren’t they the ones tied up in some legal battle last year via another company?

[burns]

Re: Hotpoint 17450 motor cutting out

Saw that on the photo after so defiantly not got one. But do have the twin tub one. If anyone should need one in years to come.

[burns]

Re: Hotpoint 17450 motor cutting out

May have one if it’s the same as the twin tub and top loader? I’ll check tomorrow.

[burns]

Re: DASA membership at all time low?

Yes your correct technically. But the reason for this is Dasa has swapped their website to a site capable of processing renewals online etc. Last year the old site was tweaked to be able to remove expired members this caused it to crash and gave all sorts of problems. This new site only went live on Friday and letters have gone out to members today/tomorrow. Renewals will now be done online. But non of the members list has been carried over as it’s down to the members to log on and register their details. It’s been a long time in coming. The changes are back office stuff so not that obvious. If the member doesn’t set their business address on Google maps it defaults to Northants. So there could be a glut of members in Northants if not done correctly.

[burns]

Re: MAYTAG G32026PELB S/N 10035846GG

Google service nation. Ex maytag engineer. Covers your area.

[burns]

Re: CDA V10SS Oven fan element

The original part number is 12570030.
Connect also list this and alternatives under these numbers:
5045178908081
5045170739003
5045174644426
5045381333144

[burns]

Re: zrb34211wa diagram

Thanks. Much appreciated.

[burns]

Re: Hose clips

obtained several pairs from this firm
info@uk.oetiker.com. These have vertical and horizontal jaws
https://encrypted-tbn3.gstatic.com/imag … Aj29xfKrUl
Oetiker UK Limited
Foundry Close
RH13 5PX Horsham, Sussex
T+44 1403 26 04 78

[burns]

Re: Maytag GZ2626GEKB Fridge/Freezer Water not shutting off

Hi, sounds like you may need a water filter head kit. This is the connection the water filter fits into and they can break off inside and start to leak. http://www.partadvantage.com/diagram/2/ … 88/680/900
Part required 67004659 if not available through UKW shop, then go to ukservica@maytag.com. The fittings can differ so check the water connection where the plumbing kit joins to take the initial water up to the filter. On this machine the filter is before any valve and at mains pressure permanently.

[burns]

Re: MAYTAG ICE ENCLOSURE

Hi Eddie dont have an enclosure. But do have a template to repair them. If you get the whole unit drop it round and I may be able to sort it.

[burns]

Re: 070 Number scams. Warning!

Was given a 070 number by a landlord to call his tennant. She never answered went straight to voicemail. Need to check my bill before I return with parts. Insurers may be getting an extra line on the their invoice.
THANKS AGAIN.

[Author]

Posts