[bzz67]

Re: WHP / Proline TDC75 (8540 635 15001) T/dryer stats.

Safety thermostat
(in heater) TL

Switch on temperature
<-35 °C

min.
< °C

max.
35 °C

Switch off temperature
260 ± 10 °C

Fluff thermostat
Color code

Green

Switch on temperature
165 ± 10 °C

Switch off temperature
210 ± 9 °C

Exhausting thermostat (in airchannel) TH 1.1
TH 1.1

Switch on temperature
68 ± 3 °C

Switch off temperature
83 ± 3 °C
this is from whirlpool, it appears the green spot is the operating stat and the other being the higher temp toc

[bzz67]

Re: WHP / Proline TDC75 (8540 635 15001) T/dryer stats.

usually the tags have coloured sleeves, the green tags to green spot stat.

[bzz67]

Re: bosch w/m wae24162gb/03

when you say it spins for a couple of seconds, does this mean no distribution speed!, if it goes straight into spin i would start at the motor tacho. the module would probably switch off power to motor if does’nt get any feed back within a couple of seconds. maybe 😕

[bzz67]

Re: zanussi dw 927 not rinsing

for the machine to allow the heater to come on it must sense that it already has correct water level. if it has not then there is a fault in the pressure system. on the other hand, maybe it fills with water but the circulating pump isn’t pushing the water around the system.

[bzz67]

Re: Hoover HW130M UK washer/dryer: thermostat keeps tripping

airflow problems are common, check for fluff blockages in fan chamber and mostly in small bent hose that connects condenser to drum, condenser can also block or fan speed fault.

[bzz67]

Re: Whirlpool 3RAWZ480E MQO

maybe there is a TOC in the motor. will not restart until it cools!!

[bzz67]

Re: Bosch Dishwasher Guidance

sounds like the model coding may have gone out of sink. if you ever have to change the pcb on most bosch dishwashers you have to programme the correct model coding, if you dont the kind of fault you mentioned occurs.

[bzz67]

Re: indesit isl70c sensor dry fault

spot on iadom, i cleaned up surfaces on brush and drum sensing strap and that has indeed sorted it.
thanks.

helo-75, surely if the sensors had contact it would act as if the clothes were wet and contiue to dry!.

[bzz67]

Re: indesit isl70c sensor dry fault

yes good load of damp towels.

[bzz67]

Re: Weee queereee

all fluor prices had a levey added months ago, i struck a deal with my supplier, “if i buy them from you, you take my old ones, seeing as you have charged extra.” they agreed. i then had to register my store to hold hazardous waste. and have a waste carriers licence of course.

[bzz67]

Re: Yet another gripe at connect.

GSK620 £9.86 gen £7.25

[bzz67]

Re: Yet another gripe at connect.

on my account its £8.20 + vat, i guess my discount on servis has gone down some, i will ask the rep about that next time i see him.

[bzz67]

Re: diplomat part

Thanks, thats why i could’nt find the solenoid then.

[bzz67]

Re: Whirlpool top loader no motor drive.

remove the cabinet by unscrewing two screws on facia, slide foward and flip back over. remove two clips, unplug wiring loom, now remove cabinet.
the pump unclips from the motor, 2 4BA screws holding the motor clips, then motor comes off for easy access to coupling part number 481932528035. nice and easy to work on once you have seen a couple.

[bzz67]

Re: Are there any decent mini washers?

have you got a product code for these Penguin45, i am very interested in getting some of those for stock.

[Author]

Posts